Connected I/O module is OP5330 - 16 Analog Output at 1 MSPS or 8 Analog Output at 2 MSPS
...
| Note |
|---|
Before designing cables, OPAL-RT recommends using the guideline Simulator EMC cable recommendations. |
Connector P1 |
| |||
|---|---|---|---|---|
| Assignment | DB37F Pin | Assignment | |
1 | +AOUT00 | 20 | GND | |
2 | +AOUT01 | 21 | GND | |
3 | +AOUT02 | 22 | GND | |
4 | +AOUT03 | 23 | GND | |
5 | +AOUT04 | 24 | GND | |
6 | +AOUT05 | 25 | GND | |
7 | +AOUT06 | 26 | GND | |
8 | +AOUT07 | 27 | GND | |
9 | +AOUT08 | 28 | GND | |
10 | +AOUT09 | 29 | GND | |
11 | +AOUT10 | 30 | GND | |
12 | +AOUT11 | 31 | GND | |
13 | +AOUT12 | 32 | GND | |
14 | +AOUT13 | 33 | GND | |
15 | +AOUT14 | 34 | GND | |
16 | +AOUT15 | 35 | GND | |
17 | +12 V* | 36 | GND | |
18 | Not used | 37 | Not used | |
19 | Not used | |||
* Internally provided by the simulator. Non-isolated, limited to 400 mA.
Analog Output channels in this bitstream can be reserved by eHS and managed in OPAL-RT Schematic Editor.
ANALOGOUT BLOCK PARAMETERS | ||
Parameters | CH00-07 | CH08-15 |
Controller Name | 'OP4610XG OpCtrl' | |
DataIn Port Number | 19 | 20 |
Number of channels | 8 | 8 |
Voltage range | -16 to 16 | -16 to 16 |