Versions Compared

Version Old Version 5 New Version 6
Changes made by

Sylvain Ménard

Sylvain Ménard

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Note

The optional connector kit must be selected at the time of purchase and factory-installed.

If the OP3811 or the OP3812 GPS Synchronization Connectors PCIe I/O cards are ordered, none of the following expansion options can be installed because the I/O cards also require a connector plate to be installed in the same location.

RS422 Connector kit
(OP5969-1)

OP4510 V2-1 RS422 ConnectorsImage Removed
OP4510 V2-1 RS422 ConnectorsImage Added

DEFAULT connector kit installed
The DB9 connectors for RS422 signals are typically used to transmit differential encoder inputs and outputs. Refer to the OP5969-1 User Manual for specifications and pin assignment.

Fiber-Optic Connector kit
(OP5969-2)

OP4510 V2-2 Fiber Optic ConnectorsImage Removed
OP4510 V2-2 Fiber Optic ConnectorsImage Added

Optional connector kit
Fiber-optic connector kit provides 6 RX and 6 TX channels.
These channels can be used as digital I/Os or for low-speed communication protocols.
The ORION protocol

,

developed by OPAL-RT is compatible with these channels and available in custom bitstreams. Refer to the OP5969-2 User Manual for specifications and pin assignment.

OP4512 PCIe Optional I/O cards

...

Note

Only ONE of the I/O cards may be installed in an OP4512 at a time.
The PCIe optional I/O card must be selected at the time of purchase and factory-installed.
Only the OP5451 complies to the UKCA and CE markings.

OP5451
Copper cable

Image RemovedOP5451
Image Added

Passive/active PCIe expansion with standard PCIe iPass x4 connector interface. This option is used to connect the OP4512 to an OPAL-RT expansion I/O chassis. The option comes as a kit, including a 2 m (6 ft) long copper cable .

OptionPlatformType of cable

Platforms:

  • OP4512 to OP4520

  • OP4512 to OP5607

  • OP4512 to OP5705-IO

  • OP4512 to OP5707-IO

Copper cable, 2 m (6 ft)

OP3411

OP3411Image Added

CANbus protocol expansion board with a CANbus standard 25-pin connector interface.

OP3811

PCIe I/O Card

OP3811Image Added

Connector plate

Image Added

The GPS time synchronization (IEEE 1588) with RJ45 connector interface comes in 2 parts: the PCIe card and the connector plate with an external synchronization input connector and fiber-optic synchronization output.

If this option is selected, none of the I/O Expansion Options (OP5969-1, OP5969-2) could be installed because the connector plate needs to be installed at the same place.

OP3812

PCIe I/O Card

OP3812Image Added

Connector plate

Image Added

GPS time synchronization (IEEE 1588) with SFP connector interface comes in 2 parts: the PCIe card and the connector plate with an external synchronization input connector and fiber-optic synchronization output.

If this option is purchased, none of the I/O Expansion Options (OP5969-1, OP5969-2) could be installed because the connector plate needs to be installed at the same place.

OP3821

OP3821_Ethernet_BackplateImage Added

Dual-port PCIe x1 Gigabit Ethernet interface.