| Warning |
|---|
The ACIM machine model and its associated Hardware Configurations have been archived. If starting a new project, consider using the SCIM Machine Model instead. |
The AC Induction Machine model implements a three-phase induction machine (asynchronous machine) with a resolver, encoder, and hall effect sensor.
...
Channel Name | Type | Units | Default Value | Description |
|---|---|---|---|---|
| Enable | Input | 0 | Set this channel to one of the following values:
| |
| Load Torque | Input | Newton Meters | 0Nm | Torque applied to the shaft of the machine. |
| Rotor Temperature | Input | Kelvin | 298.15K | Temperature of the motor rotor. If this value is greater than 0, Temperature Correction is performed for the Stator Resistance and the Rotor Resistance. |
| Stator Temperature | Input | Kelvin | 298.15K | Temperature of the motor stator. If this value is greater than 0, Temperature Correction is performed for the Stator Resistance and the Rotor Resistance. |
| Va | Output | Volts | 0V | Phase A voltage of the electric motor. |
| Vb | Output | Volts | 0V | Phase B voltage of the electric motor. |
| Vc | Output | Volts | 0V | Phase C voltage of the electric motor. |
| Ia | Output | Amperes | 0A | Phase A current of the electric motor. |
| Ib | Output | Amperes | 0A | Phase B current of the electric motor. |
| Ic | Output | Amperes | 0A | Phase C current of the electric motor. |
| Electromagnetic Torque | Output | Newton Meters | 0Nm | Electromagnetic torque of the electric motor. |
| Speed | Output | RPM | 0RPM | Rotor speed of the electric motor. |
| Position | Output | Radians | 0rad | Rotor position of the electric motor. |
...