By default, one signal group is created for the data logger. A signal group is defined as a set of signals to be acquired once the trigger condition of this signal group is encountered.
Users can define multiple trigger conditions for various acquisitions that may or may not share the same triggering signals. Each signal group stores signals in its own data file.
In this quick start, we cover only the most common parameters. For information on all parameters, see Data Logger Configuration.
...
In the main Data Logger tab, set the following parameters:
Recording mode: Set to Automatic for the acquisition to
startbe armed when the simulation starts.
No data loss: Enables the data logger to cadence the simulation if an offline simulation mode of execution is selected. It can’t be used in real-time mode. The simulation runs as fast as the data logger can save data.
...
Let's add two signal groups by clicking twice on the Add 1 item button (1).
...
Each signal group can be configured from the previous window or from each individual signal group window. (Click each signal group in the left panel to access their window.)
...
Let's leave all parameters untouched for now.
| Background Color | ||
|---|---|---|
| ||
Note:
|
...
|
The settings are already correct, click OK to continue.