Table of Contents | ||
---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Status | ||||
---|---|---|---|---|
|
Status | ||||
---|---|---|---|---|
|
Introduction
This firmware includes:
One eHS x128 Gen4 Solver
One Dual Permanent Magnet Synchronous Machines (PMSM-VDQ) model
One Quad Generic Machines (GM) model
One Analog Output Mapping and Rescaling (AOMR) module
One Analog Input Differential Rescaling (AIR) module
One Thermal Losses (TL) module
One Saturable Transformer (satXFO) module
LoadIn/DataIn/DataOut mapping
LoadIn | DataIn | DataOut | |
1 | Config eHS | Inputs eHS | eHS Averaged |
2 | Scenario / Rst eHS = Status | TSDO 1 - eHS 0 to 7 | eHS DownSample |
3 | TSDO 2 - eHS 8 to 15 | Digital In 1A - 0 to 7 | |
4 | PWM 1A - 0 to 7 | TSDO 3 - eHS 16 to 23 | Digital In 1A - 8 to 15 |
5 | PWM 1A - 8 to 15 | TSDO 4 - eHS 24 to 31 | Digital In 1A - 16 to 23 |
6 | PWM 1A - 16 to 23 | TSDO 5 - eHS 32 to 39 | Digital In 1A - 24 to 31 |
7 | PWM 1A - 24 to 31 | TSDO 6 - eHS 40 to 47 | Analog In 2A - 0 to 7 |
8 | TSDO 7 - eHS 48 to 55 | Analog In 2A - 8 to 15 | |
9 | TSDO 8 - eHS 56 to 63 | PMSM VDQ 1/2 | |
10 | TSDO 9 - eHS 64 to 71 | Encoder Input on RS422 | |
11 | Digital Out 1A - SDO 0 to 7 | Quad Generic Machine | |
12 | Config AOMR | Digital Out 1A - SDO 8 to 15 | Encoder Input on Digital In 1A |
13 | eHS PWM 1 - eHS 0 to 7 | Digital Out 1A - SDO 16 to 23 | Thermal Losses |
14 | eHS PWM 2 - eHS 8 to 15 | Digital Out 1A - SDO 24 to 31 | |
15 | eHS PWM 3 - eHS 16 to 23 | ||
16 | eHS PWM 4 - eHS 24 to 31 | ||
17 | Config eHS AIR | ||
18 | Config PMSM VDQ1/2 | ||
19 | Config Encoder Input on RS422 | AOMR/ Analog Out 1B - 0 to 7 | |
20 | Config Quad Generic Machine | Analog Out 1B - 8 to 15 | |
21 | Config Encoder Input on Digital In 1A | Analog Out 2B - 0 to 7 | |
22 | Config Thermal Losses | Analog Out 2B - 8 to 15 | |
23 | Config Encoder Output on RS422 | eHS PWM 1 - 0 to 7 | |
24 | eHS PWM 2 - 8 to 15 | ||
25 | eHS PWM 3 - 16 to 23 | ||
26 | eHS PWM 4 - 24 to 31 | ||
27 | eHS SWG | ||
28 | PMSM VDQ 1/2 | ||
29 | Quad Generic Machine | ||
30 | Thermal Losses | ||
31 | Encoder Output on RS422 | ||
32 | LEDs | ||
33 | TSDO 10 - eHS 72 to 79 | ||
34 | TSDO 11 - eHS 80 to 87 | ||
35 | TSDO 12 - eHS 88 to 95 | ||
36 | TSDO 13 - eHS 96 to 103 | ||
37 | TSDO 14 - eHS 104 to 111 | ||
38 | TSDO 15 - eHS 112 to 119 | ||
39 | TSDO 16 - eHS 120 to 127 | ||
40 | TSDO 17 - eHS 128 to 135 | ||
41 | TSDO 18 - eHS 136 to 143 |
System Overview
Include Page | ||||
---|---|---|---|---|
|
eHS solver
Status | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Connectivity
Status | ||||
---|---|---|---|---|
|
Source Type | Source Index | Source Name | Details |
---|---|---|---|
Input | 0 | CPU Input | |
1 | eHS Analog In | Slot 2A - Ch00-15 | |
2 | PMSM VDQ 1/2 | PMSM1 Ia/PMSM1 Ib | |
PMSM2 Ia/PMSM2 Ib | |||
3 | Sine Wave Generator | ||
4 | Quad Generic Machine | IM1 Stator Ia/IM1 Stator Ib/IM1 Rotor Ia/IM1 Rotor Ib | |
IM2 Stator Ia/IM2 Stator Ib/IM2 Rotor Ia/IM2 Rotor Ib | |||
IM3 Stator Ia/IM3 Stator Ib/IM3 Rotor Ia/IM3 Rotor Ib | |||
IM4 Stator Ia/IM4 Stator Ib/IM4 Rotor Ia/IM4 Rotor Ib | |||
5 | Data stream from SFP #00 | ||
6 | Saturbale Transformer | ||
Gate | 0 | CPU Gating Signal | |
1 | PWM | ||
2 | Digital Input | Slot 1A - Ch00-31 |
Status | ||||
---|---|---|---|---|
|
To contextualize the Input and Gate Configuration table with this firmware configuration, the eHS firmware config tab must be configured with the following custom input source enumeration:
Code Block |
---|
{'CPU Model',0,64;'Sine Wave Generator',3,32;'PMSM',2,4;'GM',4,16;'Saturable Transformer',6,32} |
And this custom gate sources enumeration:
Code Block |
---|
{'CPU Model',0,72;'Digital Inputs',2,32;'PWM',1,32} |
Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Communication port configuration for the Dual PMSM (VDQ) block
| Dual PMSM Motors VDQ | |
Machine Label | PMSM 1 | PMSM 2 |
Data In Port Number | 28 | |
Load In Port Number | 18 | |
Data Out Port Number | 9 |
Connectivity (Input)
codeThe signals received could be used as external carrier for machine resolver module.
Code Block |
---|
Analog In - Slot 2A - Ch00-01 |
Encoder Output
Encoder outputs are sent to
Code Block |
---|
Digital Out - Slot 3B - RS422 |
Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Communication port configuration for the Quad Generic Machine (GM) block
| Quad Generic Machine | |||
Machine Label | IM 1 | IM 2 | IM 3 | IM 4 |
Data In Port Number | 29 | |||
Load In Port Number | 20 | |||
Data Out Port Number | 11 |
Connectivity (Input)
codeThe signals received could be used as external carrier for machine resolver module.
Code Block |
---|
Analog In - Slot 2A - Ch00-01 |
Encoder Output
Encoder outputs are sent to
Code Block |
---|
Digital Out - Slot 2B |
Encoder 1 | Encoder 2 | |
---|---|---|
A | Ch00 | Ch04 |
B | Ch01 | Ch05 |
Z | Ch02 | Ch06 |
Include Page | ||||
---|---|---|---|---|
|
Communication port configuration for the Thermal Losses (TL) block
Thermal Losses | |
---|---|
Data In Port Number | 30 |
Load In Port Number | 22 |
Data Out Port Number | 13 |
Include Page | ||||
---|---|---|---|---|
|
Communication port configuration for the Analog Output Mapping and Rescaling (AOMR) block
AOMR - Slot 2B | |
---|---|
Version | V2 |
Data In Port Number | 19 |
Load In Port Number | 12 |
Include Page | ||||
---|---|---|---|---|
|
Communication port configuration for the Analog Input Differential Rescaling (AIR) block
AIR - Slot 2A | |
---|---|
Channels | Ch00-15 |
Load In Port Number | 17 |
AOMR Output
Lane Index | Signal Source | Details |
---|---|---|
0 | eHS Outputs | eHS Y01-128 |
1 | PMSM VDQ 1/2 AnalogOut | |
2 | Quad Generic Machine AnalogOut | |
3 | Data Stream from SFP #01 |
Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Communication port configuration for the Analog Input (AI) block
Slot 2A | ||
---|---|---|
Channels | Ch00-07 | Ch08-15 |
Data Out Port Number | 7 | 8 |
Connector Pin Assignment
Please refer to your hardware documentation
Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Communication port configuration for the Analog Output (AO) block
Slot 1B | Slot 2B | |||
---|---|---|---|---|
Channels | Ch00-07 | Ch08-15 | Ch00-07 | Ch08-15 |
Data In Port Number | 19 | 20 | 21 | 22 |
Connector Pin Assignment
Please refer to your hardware documentation
Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Communication port configuration for the Digital Input (DI) block
Slot 1A | ||||
---|---|---|---|---|
Channels | Ch00-07 | Ch08-15 | Ch16-23 | Ch24-31 |
Data Out Port Number | 3 | 4 | 5 | 6 |
Connector Pin Assignment
Please refer to your hardware documentation
Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Communication port configuration for the Digital Output (DO) block
Slot 1A | ||||
---|---|---|---|---|
Channels | Ch00-07 | Ch08-15 | Ch16-23 | Ch24-31 |
Data In Port Number | 11 | 12 | 13 | 14 |
Load In Port Number | 4 | 5 | 6 | 7 |
Connector Pin Assignment
Please refer to your hardware documentation
Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Communication port configuration for the Encoder Intput (ENC IN) block
Slot 3A - RS422 | |
---|---|
Nb of Encoder Signals | 2 |
Load In Port Number | 19 |
Data Out Port Number | 11 |
Connector Pin Assignment
Please refer to your hardware documentation
Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Communication port configuration for the Encoder Output (ENC OUT) block
Slot 3B - RS422 | |
---|---|
Nb of Encoder Signals | 2 |
Data In Port Number | 31 |
Load In Port Number | 23 |
Connector Pin Assignment
Please refer to your hardware documentation