Versions Compared

Old Version 5

changes.mady.by.user Sylvain Ménard

Saved on

compared with

New Version Current

changes.mady.by.user Sylvain Ménard

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents
maxLevel1
Include Page
PINT:General Section
PINT:General Section

Status
colourGreen
titleSPS WORKFLOW

Introduction

This firmware includes:

  • One eHS x64 Gen4 Solver

  • One Dual Permanent Magnet Synchronous Machines (PMSM-VDQ) model

  • Two Asynchronous Induction Machine (IM) models

  • One Five-phase Switched Relutance Machine (SRM) model

  • One Analog Output Mapping and Rescaling (AOMR) module

  • One Analog Input Differential Rescaling (AIR) module

  • One Resolver and Encoder Out module


LoadIn/DataIn/DataOut mapping


LoadIn

DataIn

DataOut

1

Config eHS

Inputs eHS

eHS Averaged

2

Scenario / Rst eHS = Status

TSDO 1 - eHS 0 to 7

eHS DownSample

3


TSDO 2 - eHS 8 to 15

Analog In 2A - 0 to 7

4

Config eHS PWM -  0 to 7

TSDO 3 - eHS 16 to 23

Analog In 2A - 8 to 15

5

Config eHS PWM -  8 to 15

TSDO 4 - eHS 24 to 31

Digital In 1A - 0 to 7

6

Config eHS PWM -  16 to 23

TSDO 5 - eHS 32 to 39

Digital In 1A - 8 to 15

7

Config eHS PWM -  24 to 31

TSDO 6 - eHS 40 to 47

Digital In 1A - 16 to 23

8

Config PMSM VDQ 1/2

TSDO 7 - eHS 48 to 55

Digital In 1A - 24 to 31

9

Config IM 1

TSDO 8 - eHS 56 to 63

PMSM VDQ 1/2

10

Config IM 2

TSDO 9 - eHS 64 to 71

IM 1

11

Config SRM 1

eHS PWM -  0 to 7

IM 2

12

Config AOMR

eHS PWM -  8 to 15

SRM 1

13

PWM 1B -  24 to 31

eHS PWM -  16 to 23

Resolver/Encoder 1/2

14

PWM 1B -  16 to 23

eHS PWM -  24 to 31

Encoder Input on RS422

15

PWM 1B -  8 to 15

PMSM VDQ 1/2

PQ Estimation

16

PWM 1B -  0 to 7

IM 1


17

Config eHS to Machines Mapping

IM 1 Mtx


18

Config MechMux

IM 2


19

Config Resolver/Encoder 1/2 Offset

IM 2 Mtx


20

Config Resolver/Encoder 1/2

SRM 1


21

Config Resolver/Encoder 1/2 PhaseShift

AOMR/Analog Out 2B - 0 to 7


22

Config Encoder Input on RS422

Digital Out 1B - SDO 24 to 31


23


Digital Out 1B - SDO 16 to 23


24


Digital Out 1B - SDO 8 to 15


25


Digital Out 1B - SDO 0 to 7


26

Config Encoder Output on RS422

LEDs


27

Config AIR

Analog Out 2B - 8 to 15


28


eHS SWG


29


Encoder Output on RS422



System Overview

Image RemovedImage Added


Include Page
PINT:Extensive I/O compatibility - OP4XXX IOConfig1 (Polymorphism)
PINT:Extensive I/O compatibility - OP4XXX IOConfig1 (Polymorphism)

eHS solver

Status
colourGreen
titleSpecific to SPS Workflow

Include Page
PINT:SPS - eHS Block
PINT:SPS - eHS Block

Connectivity

Status
colourGreen
titleSPS WORKFLOW SPECIFIC

Source Type

Source Index

Source Name

Details

Input

0

CPU Input


1

eHS Analog In

Slot 2A - Ch00-15

2

PMSM VDQ 1/2

PMSM1 Ia/PMSM1 Ib

PMSM2 Ia/PMSM2 Ib

3

Sine Wave Generator


4

Induction Machine

IM1 Stator Ia/IM1 Stator Ib/IM1 Rotor Ia/IM1 Rotor Ib

IM2 Stator Ia/IM2 Stator Ib/IM2 Rotor Ia/IM2 Rotor Ib

5

Switched Relutance Machine

SRM1 Ia/SRM1 Ib/SRM1 Ic/SRM1 Id/SRM1 Ie

Gate

0

CPU Gating Signal


1

PWM


2

Digital Input

Slot 1A - Ch00-31

Status
colourGreen
titleSPS WORKFLOW SPECIFIC

To contextualize the Input and Gate Configuration table with this firmware configuration, the eHS firmware config tab must be configured with the following custom input source enumeration:

Code Block
{'CPU Model',0,64;'Sine Wave Generator',3,32;'PMSM',2,4;'IM',4,8;'SRM',5,5}

And this custom gate sources enumeration:

Code Block
{'CPU Model',0,72;'Digital Inputs',2,32;'PWM',1,32}


Include Page
PINT:Dual PMSM VDQ firmware block section
PINT:Dual PMSM VDQ firmware block section

Communication port configuration for the Dual PMSM (VDQ) block

      

Dual PMSM Motors VDQ 1

Machine Label

PMSM 1

PMSM 2

Data In Port Number

15

Load In Port Number

8

Data Out Port Number

9


Include Page
PINT:Induction Machine firmware block section
PINT:Induction Machine firmware block section

Communication port configuration for the Induction Machine (IM) block


IM 1

IM 2

Data In Port Number

16

18

Data In Mtx Port Number

17

19

Load In Port Number

9

10

Data Out Port Number

10

11


Include Page
PINT:SRM firmware block section
PINT:SRM firmware block section

Communication port configuration for the Switched Relutance Machine (SRM) block


SRM 1

Data In Port Number

20

Load In Port Number

11

Data Out Port Number

12


Include Page
PINT:Resolver and Encoder firmware block section
PINT:Resolver and Encoder firmware block section

Communication port configuration for the Resolver and Encoder block


Resolver/Encoder 1/2

Load In Port Number

20

Offset Load In Port Number

19

PhaseShift Load In Port Number

21

Data Out Port Number

13

Connectivity (Input)

The signals received could be used as external carrier for machine resolver module. 
Code Block
Analog In - Slot 2A - Ch00-01

Communication port configuration for the Resolver and Encoder Mapping block


Resolver/Encoder 1/2

Load In Port Number

18


Include Page
PINT:AOMR firmware block section
PINT:AOMR firmware block section

Communication port configuration for the Analog Output Mapping and Rescaling (AOMR) block


AOMR - Slot 2B

Version

V1

Data In Port Number

21

Load In Port Number

12

AOMR Output

Index 

Signal Source

0

Resolver 1 Sine

1

Resolver 1 Cosine

2

Resolver 2 Sine

3

Resolver 2 Cosine

4 .. 47

Not Used

48 .. 127

User Defined

128 .. 191

eHS Y01 to Y64


Include Page
PINT:AIR firmware block section
PINT:AIR firmware block section

Communication port configuration for the Analog Input Differential Rescaling (AIR) block


AIR - Slot 2A

Channels

Ch00-15

Load In Port Number

27


Include Page
PINT:Analog In block
PINT:Analog In block
Include Page
PINT:Analog In block section
PINT:Analog In block section

Communication port configuration for the Analog Input (AI) block


Slot 2A 

Channels

Ch00-07

Ch08-15

Data In Port Number

3

4

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Include Page
PINT:Analog Out block
PINT:Analog Out block
Include Page
PINT:Analog Out block section
PINT:Analog Out block section

Communication port configuration for the Analog Output (AO) block


Slot 2B

Channels

Ch00-07

Ch08-15

Data Out Port Number

21

27

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Include Page
PINT:Digital In block
PINT:Digital In block
Include Page
PINT:Digital In block section
PINT:Digital In block section

Communication port configuration for the Digital Input (DI) block


Slot 1A 

Channels

Ch00-07

Ch08-15

Ch16-23

Ch24-31

Data Out Port Number

5

6

7

8

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Include Page
PINT:Digital Out block
PINT:Digital Out block
Include Page
PINT:Digital Out block section
PINT:Digital Out block section

Communication port configuration for the Digital Output (DO) block


Slot 1B 

Channels

Ch00-07

Ch08-15

Ch16-23

Ch24-31

Data In Port Number

25

24

23

22

Load In Port Number

16

15

14

13

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Include Page
PINT:Encoder Input block
PINT:Encoder Input block
Include Page
PINT:Encoder Input block section
PINT:Encoder Input block section

Communication port configuration for the Encoder Intput (ENC IN) block


Slot 3A - RS422 

Nb of Encoder Signals

2

Load In Port Number

22

Data Out Port Number

14

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Include Page
PINT:Encoder Output block
PINT:Encoder Output block
Include Page
PINT:Encoder Output block section
PINT:Encoder Output block section

Communication port configuration for the Encoder Output (ENC OUT) block


 Slot 3B - RS422 

Nb of Encoder Signals

2

Data In Port Number

29

Load In Port Number

26

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment