Quick Nav
Table of Contents | ||||||
---|---|---|---|---|---|---|
|
Have a question or need help?
Auibutton | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Solution
direction | horizontal |
---|
Cfm tabs page | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
OPAL-RT's SCPI driver is included standard with RT-LAB. It enables the control of one or multiple devices operated by |
the Standard Commands for Programmable Instruments (SCPI) using TCP/IP. |
Cfm tabs page | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
The Standard Commands for Programmable Instruments defines a standard for syntax and commands to use in controlling programmable test and measurement devices, such as automatic test equipment and electronic test equipment. The default TCP port is 5025 as the standard defines it. |
Documentation
Auibutton | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|
Product Selection Guide
Product OP3163 is required to use SCPI with RT-LAB. Since simulators come with at least one available ethernet port, no hardware add-ons are required, however, if ports are required on the real-time simulator, these can be added via kit. Note that for applications requiring many ethernet ports, the OP4510 platform is not recommended.
Type | Product Number(s) | Optional | Description | Simulator Compatibility | Additional requirement(s) | |||
OP4510-series | OP5600-series | OP5700-series | OP5000-series | |||||
Software | OP3163 | Driver: SCPI Equipment control and Monitoring Interface over TCP/IP. |
Hardware | OP3821 |
Dual-port PCI-E X1 Gigabit Ethernet Kit for OP4510 Real-Time Simulators. Can be added if more physical ethernet ports are required for Modbus TCP. |
OP4510 requires its PCIe slot to be available | ||||
Hardware | I350T4V2BLK |
Intel I350T4V2 Quad Port Ethernet Server Adapter 10/100/1000 Mbps. Can be added if more physical ethernet ports are required for Modbus TCP. |
Open PCIe slot required |