OP4512 Standard Configuration

...

A. DB37 connectors for digital or analog inputs and outputs.

B. In the the standard OP4512 configuration, this section contains a DB9 connector module for RS422 signals typically used to transmit differential encoder inputs and outputs, however, other options are available.

• See 

  See OP4512 I/O Expansion Options

   below

   below for detailed information on available configuration options.

C. Standard computer connectors (from left to right):

• 1 Serial Port (COM1)

• 1 IPMI LAN port

• 2 USB port 2.0

• 2 USB port 3.0

• 2 network Gigabit Ethernet RJ-45 Ports

• 1 VGA Port

• Unit Identifier (UID) switch

D. 1 PCIe free slots are available for optional I/O card. See See OP4512 PCIe optional I/O cards below.

OP4512 I/O Expansion

...

Options

The OP4512 comes with an RS-422 Connector Kit (OP5969-1) factory installed by default.

...

RS422 Connector kit (OP5969-1)

Image Removed

Image Added	DEFAULT connector kit installed The DB9 connectors for RS422 signals are typically used to transmit differential encoder inputs and outputs. Refer to the OP5969-1 User Manual for specifications and pin assignment.
Fiber-Optic Connector kit (OP5969-2)

Image Removed

Image Added

Optional connector kit Fiber-optic connector kit provides 6 RX and 6 TX channels. These channels can be used as digital I/Os or for low-speed communication protocols. The ORION protocol, developed by OPAL-RT is compatible with these channels and available in custom bitstreams. Refer to the OP5969-2 User Manual for specifications and pin assignment.

OP4512 PCIe Optional I/O cards

...

There are several PCIe options available for the OP4512.

Note
Only ONE of the I/O cards may be installed in an OP4512 at a time. The PCIe optional I/O card must be selected at the time of purchase and factory-installed.

OP5451 Copper cable

Image Removed

Image Added	Passive/active PCIe expansion with standard PCIe iPass x4 connector interface. This option is used to connect the OP4512 to an OPAL-RT expansion I/O chassis. The option comes as a kit, including a copper cable. Option Platform Type of cable OP5451 OP4512 to OP4520 OP4512 to OP5607 OP4512 to OP5705-IO OP4512 to OP5707-IO Copper cable, 2 m (6 ft)
OP3411

Image Removed

Image Added	CANbus protocol expansion board with a CANbus standard 25-pin connector interface.
OP3811	PCIe I/O Card

Image Removed

Image Added Connector plate

Image Removed

Image Added	The GPS time synchronization (IEEE 1588) with RJ45 connector interface comes in 2 parts: the PCIe card and the connector plate with an external synchronization input connector and fiber-optic synchronization output. If this option is selected, none of the I/O Expansion Options (OP5969-1, OP5969-2) could be installed because the connector plate needs to be installed at the same place.
OP3812	PCIe I/O Card

Image Removed

Image Added Connector plate

Image Removed

Image Added	GPS time synchronization (IEEE 1588) with SFP connector interface comes in 2 parts: the PCIe card and the connector plate with an external synchronization input connector and fiber-optic synchronization output. If this option is purchased, none of the I/O Expansion Options (OP5969-1, OP5969-2) could be installed because the connector plate needs to be installed at the same place.
OP3821

Image Removed

Image Added

Dual-port PCIe x1 Gigabit Ethernet interface.