Table of Contents | ||
---|---|---|
|
Features & Enhancements
2020.2.2
- MIL-STD-1553: Improved mechanism used for the automatic enabling of the ‘Data ready’ signal
2020.2.1
Software synch has been improved on Windows simulations to support model timesteps below 1ms
2020.2
- DataLogger Python API now supports Python 3.7. Python version 2.2, 2.3, 2.4, and 2.5 are no longer supported.
- FPGA Scope: Added functionality for intra-step FPGA signal monitoring with ScopeView
EtherCAT Slave: Added support for using multiple cards in one simulator
MIL-STD-1553: Added support for error injection for remote terminals
OPAL-RT Board: Added support for MMC for central systems
AFDX: Added new Sfunction driver for AFDX (Arinc 664P7) communication
- New RT-LAB Python API method "InstallRtlab" available to install RT-LAB on a target.
- New RT-LAB Python API method "UninstallRtlab" available to uninstall RT-LAB from a target.
- Improved compilation time when using MingW.
- Added documentation on MingW compiler.
- Updated example model in .slx and latest MATLAB versions supported.
- Checked validity of path given in parameter of "CreatePackage" method available through RT-LAB’s Python API.
- Updated RT-LAB’s Python API documentation with ImportConnections, ExportConnections, CreateConnection and DeleteConnection methods.
- "Force Refresh" button available through right-clicking a connection in the RT-LAB configuration panel is moved to the toolbar of this panel.
- Added check on disk space available when installing RT-LAB on a target.
- ScopeView: Added documentation related to OPACQ (Choosing Data Logger as a Data Source).
- ScopeView: Added trigger position and acquisition period parameters for Data Logger acquisitions.
PICKERING: Added support for GUI configuration
PICKERING: Added support for all Opal-RT-supported cards into one interface
OPC-UA Server: Added support for GUI configuration
SCPI: Added connection points for easier debugging
Bug Fixes
2020.2.4
- CAN: Fixed problem of minimum values not being imported from the DBC file
- CAN: Fixed problem of initial value not being imported from the DBC file
- CAN: Fixed problem of messages missing when importing certain DBC files
- CAN: Fixed precision loss for unsigned integers before applying the gain
- CAN: Fixed load error on OP4200 when only one channel is defined
2020.2.3
- Pickering: fixed behaviour where configured cards are missing from the hardware setup
2020.2.2
- DNP3 Slave: Fixed issues with configurations containing many signals
- IEC61850: Fixed crash when inputting incompatible SCL files (in the context of GOOSE and SV NLE lists)
- OP4200: Fixed issue with programmed timestep value in the FPGA
- SCPI: Fixed issue of the driver blocking the load of the model when the destination IP cannot be reached
- CAN: Fixed channel indexing issue
- CAN: Fixed problems arising with configurations having a large number of messages (10,000+)
2020.2.1
- Fixed call to SetParametersByName(), was generating overrun
Fixed time used to initialize OpalBoard Driver when loading a model
- Fixed version of Python set up on OP6000 target
CAN: Fixed issue with the model not receiving CAN messages
DIANE: Fixed indexing of arrays starting at 0
AFDX: Fixed validation of ES and VL IDs
AFDX: Improved path filtering when inputting a .hex or .adc file
SCPI: Fixed automatic command formatting for MAGNA power supplies
Fast Scope FPGA: Fixed issue preventing the FPGA scope from being enabled
2020.2
- Improved robustness of RT-LAB’s configuration panel
- The license server cannot be started twice on the same server.
- Blocked MATLAB (32 bits) when using a 64-bit compiler to avoid undefined behavior.
- IO entries are no longer duplicated in the project tree explorer.
- The pre-trigger percentage is ignored if the value starts at 0.
- Fixed "Time Factor" parameter when simulating on the localhost.
- License validation no longer reporting erroneously when used for multiple hosts.
- Getting a frame from Datalogger in a second run no longer fails.
- Fixed error when loading a model on an inaccessible target
- Frame configuration of Datalogger through the Python API, when using a value higher than a 32 bits value, now works.
- MetaController presence is now detected at boot of RT-LAB.
- Orchestra example models are now compilable with the MingW compiler.
- Logs now displayed correctly when loading a model.
- Slowness fixed when displaying windows containing project examples.
- "Disconnect selected" option, available in RT-LAB configuration panel, now fixed.
- "Open with ScopeView" button, available through a right-click on a SignalGroup, now fixed.
- Print displayed by SyncExchanger tool now fixed.
- Embedded mode now fixed.
- "Simulation Tools" entry in RT-LAB Preferences now fixed.
- Removed extra separator in the Connections menu, in the RT-LAB configuration panel.
- Fixed email address of the Support team displayed when requesting a new license fails.
- Web service for requesting licenses is now available.
- RT-LAB asking to set up a target already set up is fixed.
- Renamed "Assignation" Tab in model view "Assignment" Tab.
- Recorder now visible in project tree explorer.
- Fixed the use of vectors with Orchestra.
- Fixed OPREC file generation when no signals are present or when checked in a signal group.
- Fixed project creation when nothing is selected.
- Fixed model compilation detection, when compiled with an older version of RT-LAB.
- Fixed pop-up message "RT-LAB already installed on the target" when loading a model on a target that is correctly set up.
- Fixed options available when creating a new project.
- Fixed Monitoring Tab when using a Multi-target system based on Dolphin.
- Fixed OpInput block shown in project tree explorer when using a MATLAB environment variable for the default value.
- Fixed RT-LAB installation.
- Fixed error "Could not get the logical node ID" when trying to load a model.
- Fixed error "File not found: <path_to_subsystem>/<subsystem_name>.map" when compiling a model.
- Fixed error "Did not receive status from some nodes" when loading a model.
- Removed erroneous text from the "Probe Control" panel.
- Fixed count of connections selected when removing them from RT-LAB’s configuration panel.
- Fixed target status.
- ScopeView: Fixed navigation in the OPREC file.
CAN: Fix for CAN IDs greater than 29 bits (DRVTT-1118)
CAN: Fixed stability issues (DRVTT-1091, DRVTT-1106)
OPAL-RT Board: Fixed issues when fetching bitstream files from the standard repositories (DRVTT-1121)
IEC61850: Corrected driver to send the data types as defined in the .icd file for SV NLE (DRV-3392)
IEC61850: Removed interface pre-configuration when adding it to a project (DRVTT-42)
IEC61850: Fix for malformed SV packets when svID or data uses more than 128 octets (DRVTT-1057)
SCPI: Improved user interface (DRVTT-1043)
SCPI: Fixed driver when used with a Magna Power Source (DRV-3367)
PICKERING: Ignore notion of bits per channel for resistive cards not using the precision setting
MODBUS: Fixed issues appearing due to error codes 32 and 9 (DRVTT-1079)
Synchronization: Changed the network interface selection to be a text field (DRV-3363)