...
- A configuration containing 100 slaves streaming 16 phasors each at a data rate of 60 frames per second has been tested and validated
- Other functional configurations can be created by modifying the number of slaves, phasors, the data rate, etc...
- Custom data rate value must be between 1 and 512 frames per second
- Statistic word is not supported and will be 0 within all reported packets
- Time quality leap second information is not implemented and will be 0 within all reported packets
- Configuration reported by the C37.118 slave following a CFG-1 or CFG-2 command is the same
- Configuration frame #3 is not supported
- Fraction of second (FRACSEC) value of the data frames is reported in microseconds
- External synchronization has been fully tested using Spectracom TSync-PCIe and Oregano syn1588 PCIe NIC cards.
- On 32bit OPALRTOPAL-Linux RTLinux (x86-based) platforms (such as RedHat 5.2), a maximum of 2000 PMUs can be handled by one I/O interface instance. If more are required, it is recommended to use an extra interface instance for every 2000 PMUs needed. This limitation is not present on OPALRTOPAL-Linux RTLinux (x64-based) platforms.