The following tables provide the general pin assignments for the OP5607 DB37 and DB9 connectors.
| Info |
|---|
Detailed pin assignments for all connectors can be found in the System Description document provided with your order, or refer to the pin assignment of the OP5300 series IO module associated with each DB37F connector. |
| Note |
|---|
Before designing cables, OPAL-RT recommends using |
...
the guideline Simulator EMC cable recommendations. |
DB37 Pin Assignments
Group A |
and B - P1 |
DB37
Module pin
assignment
DB37
Module pin
assignment
DB37
Module pin
assignment
DB37
Module pin
assignment- Channels 0 to 15 | Group A and B - P2 - Channels 16 to 31 |   | ||||||
DB37F Pin | Assignment | DB37F Pin | Assignment | DB37F Pin | Assignment | DB37F Pin | Assignment | |
1 | +CH00 Note 1 | 20 | -CH00 | 1 | +CH16 | 20 | -CH16 | |
2 | +CH01 | 21 | -CH01 | 2 | +CH17 | 21 | -CH17 | |
3 | +CH02 | 22 | -CH02 | 3 | + | |||
CH08 | 22 | -CH18 | |||||
4 | +CH03 | 23 | -CH03 | 4 | +CH19 | 23 | -CH19 |
5 | +CH04 | 24 | -CH04 | 5 | +CH20 | 24 | -CH20 |
6 | +CH05 | 25 | -CH05 | 6 | +CH21 | 25 | -CH21 |
7 | +CH06 | 26 | -CH06 | 7 | +CH22 | 26 | -CH22 |
8 | +CH07 | 27 | -CH07 | 8 | +CH23 | 27 | -CH23 |
9 | +CH08 | 28 | -CH08 | 9 | +CH24 | 28 | -CH24 |
10 | +CH09 | 29 | -CH09 | 10 | +CH25 | 29 | -CH25 |
11 | +CH10 | 30 | -CH10 | 11 | +CH26 | 30 | -CH26 |
12 | +CH11 | 31 | -CH11 | 12 | +CH27 | 31 | -CH27 |
13 | +CH12 | 32 | -CH12 | 13 | +CH28 | 32 | -CH28 |
14 | +CH13 | 33 | -CH13 | 14 | +CH29 | 33 | -CH29 |
15 | +CH14 | 34 | -CH14 | 15 | +CH30 | 34 | -CH30 |
16 | +CH15 | 35 | -CH15 | 16 | +CH31 | 35 | -CH31 |
17 |
Not used | 36 | Not used | 17 |
Not used | 36 | Not used |
18 |
See note 1 | 37 |
See note 1 | 18 |
See note 1 | 37 |
See note 1 | ||||
19 | Not used | 19 |
* Non-isolated, limited to 400mA
** Vuser is available on Dout only
...
Not used |
Note 1: See the System Description document provided with your order, or refer to the pin assignment of the OP5300 series IO module associated with each DB37F connector for detailed pin assignment.
Connector Interface
Single-ended output | Negative pin is connected to ground. |
|---|---|
Single-ended input | User’s ground must be connected to the negative pin. |
Differential output | Positive and negative signals must be on positive and negative pins. Differential input: connection must be between the positive/negative pair. |