...
The target platform is selected from the OPAL-RT FPGA Synthesis Manager block, located in the RTXSG/ Tools Blockset.
The target platform is selected by the FPGA development board drop-down list. Many configuration settings are automatically set upon the selection of the target platform.
...
This check-box includes the following files plus a FSD file (used for FPGAScope feature) and an IOCONF file (used for advanced firmware description). All these files will be compressed under a single file with the extension opbin.
...
Selecting that check-box and clicking on the Generate File button is the equivalent of the Generate Programming File button in the older RT-XSG’s versions.
IOCONF / CONF / OPAL (Legacy OPAL-RT Configuration files)
Check this checkbox so that the algorithm that automatically generates the configuration files required to link the FPGA and the mezzanine(s) is launched. Introduced in RT-XSG v3.1.8, this automatic generation of the configuration file requires that the user follows a set of design rules when preparing the model. Introduced in RT-XSG v3.4.0, an algorithm is accessible to the user to automatically generate the advanced firmware description IOCONF file used as a complete solution for FPGA and CPU configuration.
It is mandatory to use specified application blocks from RT-XSG library for the algorithm to identify the right configuration and interconnection within the model.
...