Versions Compared

Version Old Version 4 New Version Current
Changes made by

Pierre-Luc Renault

Pierre-Luc Renault

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Warning

This version of the Encoder and its associated Hardware Configurations have been archived.  If  If starting a new project, consider using a different Hardware Configuration.

...

In the System Explorer window configuration tree, expand the Power Electronics Add-On custom device and select Circuit Model >> ACIM >> Encoder to display this page.  Use  Use this page to configure the Encoder sensor model. 

Excerpt

This page includes the following components:

Encoder

Name

Specifies the name of the encoder.

Description

Specifies a description for the encoder.

Configuration

Symbol

Units

Default

Description

#Pole Pairs

pp


1

Modify this parameter if the encoder is attached to a gear box rather than connected directly to the rotor.  In  In most applications this is set to 1.

Signal Order



A leads B

Select one of the following options:

  • A leads B - A is the first output pulse as the machine begins to rotate

  • B leads A - B is the first output pulse as the machine begins to rotate

If the machine appears to be turning backwards, consider switching this setting.

Angle Offset

θOffset

Degrees

0°

Angle offset applied to the machine angle, θmach

Polarity



Active Low

Select one of the following options:

  • Active High - Output signals are pulled High to signify an encoder pulse

  • Active Low - Output signas are pulled Low to signify an encoder pulse

Pulses Per Revolution

ppr


1000

Number of pulses generated by the outputs A and B in a single revolution