...
- This is also, and most importantly, where you will find the pin assignments of each I/O channel.
- To see external signals, you can use an oscilloscope to probe analog and digital output of the simulator.
- The integration model is already simulating all output signals with either a square or a sine wave signal.
- Note that the digital output board must be powered by an external source between 5V and 32V on the Vuser* and have a ground in Vrtn pins. See the System Description documents to locate those pins.
* For more information about the use of Vuser and Vrtn pleaser refer to this article in the OPAL-RT knowledge base : How to power the different DB37 boards for digital outputs.