Quick Nav
Page Content
Table of Contents | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Have a question or need help?
Auibutton | ||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
custom-icon | icon | custom|||||||||||||||||||||||||||||||
|
Solution
Cfm tabs page | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||
The IEC 62056 IEC 62056 communication protocol is supported via the use of an external gateway. The gateway is used to establish the communication with the IEC 62056 IEC 62056 slave using DNP3 master Master on the simulator side and DNP3 slave Slave on the gateway side. One or multiple IEC 62056 IEC 62056 slaves (which are typically smart meters) can report analog and digital measurements to the simulator through the gateway. The gateway will receive data from the IEC 62046 IEC 62046 slave(s) and retransmit this data to the simulator using DNP3. The equipment used to perform the protocol conversion is the SMP 4/DP gateway made by Eaton. The equipment It comes with a configuration software (SMP Manager) that is used to configure protocols involved in the communication chain. Documentation from the gateway manufacturer can be found here.
|
Cfm tabs page | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
IEC 62056 is a set of standards for electricity metering data exchange by International Electrotechnical Commission. The IEC 62056 standards are the international standard versions of the DLMS/COSEM specification. |
Auibutton |
---|
|
|
|
|
|
|
|
|
|
Product Selection Guide
Info |
---|
For this solution, please contact us for more information and pricing. |
To create a IEC 62056 an IEC 62056 Master connection, a Gateway gateway and the OPAL-RT DNP3 IEC 62056 Master driver (OP3232) are required.
Since the Gateway connects to the Real-Time Simulator via ethernet Ethernet interface (RJ-45RJ45), if additional interfaces are required in the simulator then a physical ethernet Ethernet port add-on module will need to be added (see OP3821 and I350T4V2BLK below).
Type | Description | Product Number |
---|
Optional
Description
Simulator Compatibility
Additional requirement(s)
OP4510-series
OP5600-series
OP5700-series
OP5000-series
External Hardware
Not available
Simulator Compatibility | ||||
---|---|---|---|---|
OP4510v2 | OP5033XG | OP5600v2 | OP5700 | |
External Hardware | IEC 62056 Gateway. Contact us for |
information. |
Software
OP3232
Not available | YES | YES | YES | YES | |
Driver | Driver license for DNP3 Master for exchange of data between master stations and RTU and IED |
---|
. 50 I/O data points are included. Additional data points may be added with the OP3050 product (see below). | OP3232 | YES | YES | YES | YES | ||
Additional data points | License for additional I/O data points for Ethernet-based communication protocols. |
---|
1,000, 5,000, or 30,000 (unlimited) data points may be added. License OP3232 is required. | OP3050-1000 | YES | YES | YES | YES | |
Add-on module |
---|
OP3821
Dual-port PCI- |
E X1 Gigabit Ethernet Kit for |
OP4xxx Series of Real-Time Simulators*. Can be added if more physical |
Ethernet ports are required. |
OP3821 | OP4510v2 | |||||
OP3821-4610 | OP4610XG | |||||
---|---|---|---|---|---|---|
Add-on module |
I350T4V2BLK
Intel I350T4V2 Quad Port Ethernet Server Adapter 10/100/1000 Mbps for OP5xxx Series of Real-Time Simulators*. Can be added if more physical |
Ethernet ports are required. | I350T4V2BLK |
YES |
YES |
YES |
* Available PCIe slot required. Note that OP4510 and OP4512 simulators only have one PCIe slot.