...
The new component name, type, and its parameters must be defined in the FMUGlossary.csv file located in at C:\OPAL-RT\RT-LAB\ v11.3.X[RT-LAB Version]\FMUCreator\resources\FMUGlossary\FMUGlossary.csv.
To add a new component to the existing ones in this file, the following fields must be filled in:
ID |
|---|
...
A unique ID per FMU. Can be generated by the following MATLAB command |
...
:
| |||||
Name | The name of the component. This name must be exactly the same as the name of the component that appears in the Modelica’s library. For example: GENROU, EXST1, GAST, etc. | ||||
|---|---|---|---|---|---|
Type | There are 6 types of components: | ||||
| |||||
Number of Parameters | Insert the number of parameters for each component. This value must match the number of parameters to be followed in the same row. | ||||
Parameters... | Used for naming the parameters of a component. The same parameter names must exist in the component in the Modelica library. To avoid the confusion of the parameter names when different components are combined to build a GenUnit, it is recommended to use the following suffixes depending on the component type, defined in the ‘Type’ section: | ||||
|
...