Page Content
Table of Contents | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Have a question or need help?
Auibutton | ||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Solution
Cfm tabs page | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||
OPAL-RT provides a MIL-STD-1553 driver for serial communication of data between the simulator and all devices in a typical 1553 bus network. The solution is based on an Abaco Systems RPCIE-1553 High Density PCI Express Interface and can be configured to interface with and access all functionalities, for any type of device:
|
Cfm tabs page | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
MIL-STD-1553 is a military standard widely used in avionic systems. It defines the mechanical, electrical, and functional characteristics of a serial data bus. The standard has become one of the basic tools being used today by the Department of Defense for weapon systems integration. Some of the key MIL-STD-1553 elements are the bus controller (BC), the embedded remote terminal (RT), which is a sensor or subsystem that provides its own internal 1553 interface, and the stand-alone bus monitor (BM). |
Software Platform Compatibility
Auibutton | ||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Product Selection Guide
The OPAL-RT MIL-STD-1553 solution is built upon the Abaco Systems RPCIE-1553 High Density PCIe Interface, and supports 1, 2 or 4 channel options for this hardware.
One OP5320 software license is required per installed module. Note that the real-time simulator must have at least one available PCI PCIe slot for these modules.
Type | Description | Product Number | Simulator Compatibility | ||
---|---|---|---|---|---|
OP5033XG | OP5600v2 | OP5700 | |||
Driver | Driver license for MIL-STD-1553 protocol. One license is required per QPCX-1553 board installed. See below. | OP3520 | YES | YES | YES |
Add-on module | Abaco RPCIE-1553 MIL-STD-1553 multi-function, 1 dual-redundant channel, variable voltage PCI PCIe interface. | RPCIE-G2-1DAW | YES | YES | YES |
Add-on module | Abaco RPCIE-1553 MIL-STD-1553 multi-function, 2 dual-redundant channels, variable voltage PCI PCIe interface. | RPCIE-G2-2DAW | YES | YES | YES |
Add-on module | Abaco RPCIE-1553 MIL-STD-1553 multi-function, 4 dual-redundant channels, variable voltage PCI PCIe interface. | RPCIE-G2-4DAW | YES | YES | YES |
* Available PCIe slot required. Note that OP4510 and OP4512 simulators only have one PCIe slot.