Page Content
...
The following parameters are a good starting point for the RC values: R = 10 Ω, C = 1000 pF. Choose the appropriate resistor or capacitor to achieve proper tuning, depending on application parameters.
| Info |
|---|
The OP8320-2 is equipped, by default, with a pre-soldered snubber with the following RC values: R=10Ω, C = 1000 pF. |
Voltage Divider
Tow resistors can also be used to create a voltage divider if a resistor is installed in the C socket instead of a capacitor.
...