Quick Nav
Page Content
| Table of Contents | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Have a question or need help?
| Auibutton | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| custom-icon | icon | custom|||||||||||||||||||||||||||||||
|
Solution
| Cfm tabs page | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||
OPAL-RT's DNP3 Slave I/O interface allows connecting with DNP3 master and read/write analog and binary data points. The read operation can be configured either in polling mode or in unsolicited response mode. Using a standard network interface card, this protocol can be easily and rapidly integrated into any simulation model. |
| Cfm tabs page | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
DNP3 is an open and public protocol developed with the aim to achieve open, standards-based Interoperability between substation computers, RTUs, IEDs (Intelligent Electronic Devices) and master stations (except inter-master station communications) for the electric utility industry. It is now used across several industries. |
Software Platform Compatibility
| Auibutton | |||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Auibutton | |||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||
| Auibutton | |||||||||||||||||||||||||||||||||
|
| Auibutton | |||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Product Selection Guide
This communication protocol can be added via software license to OPAL-RT real-time simulators without any additional hardware add-on modules.
The base license OP3231 comes with 50 data points (visit this page more information on data points) but if additional data points are required, then additional data points may be added via product OP3050.
Since real-time simulators come with one available ethernet Ethernet port, if additional physical ethernet Ethernet ports are required on the real-time simulator, these can be added via a kit.
Note that for applications requiring many ethernet Ethernet ports,the OP4510 platform is and OP4512 simulators are not recommended.
Type | Description | Product Number |
|---|
Optional
Description
Simulator Compatibility
Additional requirement(s)
OP4510-series
OP5600-series
OP5700-series
OP5000-series
Software
OP3231
Simulator Compatibility | ||||
|---|---|---|---|---|
OP4510v2 | OP5033XG | OP5600v2 | OP5700 | |
Driver | Driver license for DNP3 Slave protocol for exchange of data between master stations and RTU and IED | |||
. 50 I/O data points are included. |
Additional data points may be added with the OP3050 product (see below). |
Software
OP3050-1000
OP3050-5000
OP3050-30000
OP3231 | YES | YES | YES | YES | |||
Additional data points | License for additional I/O data points for Ethernet-based communication protocols. |
|---|
1,000, 5,000, or 30,000 (unlimited) data points may be added. |
Hardware
OP3821
License OP3231 is required. | OP3050-1000 | YES | YES | YES | YES | ||
Add-on module | Dual-port PCI-E X1 Gigabit Ethernet Kit for |
|---|
OP4xxx Series of Real-Time Simulators*. Can be added if more physical |
Ethernet ports are required |
OP4510 requires its PCIe slot to be available
Hardware
I350T4V2BLK
. | OP3821 | OP4510v2 | |||||
OP3821-4610 | OP4610XG | ||||||
Add-on module | Intel I350T4V2 Quad Port Ethernet Server Adapter 10/100/1000 Mbps for OP5xxx Series of Real-Time Simulators*. |
|---|
Ethernet ports are required |
. |
I350T4V2BLK |
YES |
YES |
YES |
* Available PCIe slot required. Note that OP4510 and OP4512 simulators only have one PCIe slot.