Page Comparison

...

The essential requirements of the directive 2014/30/EU are covered by the following harmonized standards:
EN61326-1 (20132021) - Electrical equipment for measurement, control and laboratory use. The immunity test requirements used for this Product qualification are for the equipment intended to be used in an industrialelectromagnetic environment.

Certifying Body	Standard Number	Standard Name	Specifications	Minimum performance requirement criteria
Image Modified	FCC part 15 (2022), subpart B	Conducted Emissions	Class A 150 kHz-30MHz
Image Modified	FCC part 15 (

2018
2022), subpart B
Radiated Emissions
Class A 30 MHz-21GHz
Image Modified
ICES-001 Issue 5 (2020)
Radiated Emissions
CSA CISPR 11:19 Group 1 - class A
30 MHz-1GHz
ICES-001 Issue 5 (2020)
Conducted Emissions
CSA CISPR 11:19 Group 1 - class A
150 kHz-30MHz
Image Modified
IEC61000-4-2 (2008)

Electrostatic Discharge Immunity
Contact: ±4 KV Air: ±2kV, ±4kV, ±8 KV
B
IEC61000-4-3 (2020)

Radiated Electromagnetic Field Immunity
80 MHz-1000MHz: 10 V/m
1.4 GHz-6 GHz: 3 V/m
A
IEC61000-4-4 (2012)
Electrical Fast Transient Immunity
Power: ±2 KV, 5 kHz & 100 kHz
I/ O Ports: ±1 KV, 5 kHz & 100 kHz
Communication Ports: ±2 KV, 5 kHz & 100 kHz
B
IEC61000-4-5 (2014) A1 (2017)

Surge Immunity
Power: ±2 KV L-PE, ±1 KV L-L
I/O Ports: N/A
Communication Ports: N/A
B
IEC61000-4-6 (2013)
Immunity to Conducted Disturbances,
Induced by Radio-Frequency Fields
Power: 3 V
I/O Ports: 3 V
Communication Ports: 3 V
A
IEC61000-4-8 (2009)
Power Frequency Magnetic Field Immunity
Continuous Field: 30A/m, 50 Hz & 60 Hz
A
IEC61000-4-11 (2020)
Voltage Dips, Short Interruptions and
Voltage Variation Immunity on AC Input
Voltage dips:
0%Un during 1 cycle
40%Un during 10 cycles (at 50 Hz)
40%Un during 12 cycles (at 60 Hz)
70%Un during 25 cycles (at 50 Hz)
70%Un during 30 cycles (at 60 Hz)
Short interruptions:
0%Un during 250 cycles (at 50 Hz)
0%Un during 300 cycles (at 60 Hz)
B
C
C
C
C
C
C
IEC61010-1:2010,
IEC 61010-1:2010
(Third edition)
/AMD1:2016
Single fault condition
Protective Conductor Abnormal
Cooling Abnormal
Input
Durability Of Markings
Applied Force
Permissible Limits For Accessible Parts
Impedance Of Protective Bonding Test
Dielectric Voltage Withstand
Humidity Conditioning
Capacitor Discharge
Stability 10 Deg
7.5.2 Handle Strength Test
7.6 Rack Mounting Test
Static Rigidity
Impact
Drop (Non-Hand Held Equipment)
Temperature
4.4.1
4.4.2.3
4.4.2.10
5.1.3 c
5.3
6.2.2
6.3
6.5.2.4
6.8
6.8.2
6.10.3
7.4
7.5.2
7.6
8.2.1
8.2.2
8.3.1
10.1

Versions Compared

Old Version 1

New Version Current

Key

	IEC61010-1:2010, IEC 61010-1:2010
2022), subpart B	Radiated Emissions	Class A 30 MHz-21GHz
Image Modified	ICES-001 Issue 5 (2020)	Radiated Emissions	CSA CISPR 11:19 Group 1 - class A 30 MHz-1GHz
Image Modified	ICES-001 Issue 5 (2020)	Conducted Emissions	CSA CISPR 11:19 Group 1 - class A 150 kHz-30MHz
Image Modified	IEC61000-4-2 (2008)	Electrostatic Discharge Immunity	Contact: ±4 KV Air: ±2kV, ±4kV, ±8 KV	B
	IEC61000-4-3 (2020)	Radiated Electromagnetic Field Immunity	80 MHz-1000MHz: 10 V/m 1.4 GHz-6 GHz: 3 V/m	A
	IEC61000-4-4 (2012)	Electrical Fast Transient Immunity	Power: ±2 KV, 5 kHz & 100 kHz I/ O Ports: ±1 KV, 5 kHz & 100 kHz Communication Ports: ±2 KV, 5 kHz & 100 kHz	B
	IEC61000-4-5 (2014) A1 (2017)	Surge Immunity	Power: ±2 KV L-PE, ±1 KV L-L I/O Ports: N/A Communication Ports: N/A	B
	IEC61000-4-6 (2013)	Immunity to Conducted Disturbances, Induced by Radio-Frequency Fields	Power: 3 V I/O Ports: 3 V Communication Ports: 3 V	A
	IEC61000-4-8 (2009)	Power Frequency Magnetic Field Immunity	Continuous Field: 30A/m, 50 Hz & 60 Hz	A
	IEC61000-4-11 (2020)	Voltage Dips, Short Interruptions and Voltage Variation Immunity on AC Input	Voltage dips: 0%Un during 1 cycle 40%Un during 10 cycles (at 50 Hz) 40%Un during 12 cycles (at 60 Hz) 70%Un during 25 cycles (at 50 Hz) 70%Un during 30 cycles (at 60 Hz) Short interruptions: 0%Un during 250 cycles (at 50 Hz) 0%Un during 300 cycles (at 60 Hz)	B C C C C C C