This product meets the essential requirements of applicable European Directives as follows:
The essential requirements of the directive 2014/30/EU are covered by the following harmonized standards:
EN61326-1 (2021) – Electrical equipment for measurement, control and laboratory use. The immunity test requirements used for this Product qualification are for the equipment intended to be used in an industrialelectromagnetic environment.
Certifying Body | Standard Number | Standard Name | Specifications | Minimum performance requirement criteria |
---|---|---|---|---|
FCC part 15 (2022), subpart B | Conducted Emissions | Class A 150 kHz-30MHz | ||
FCC part 15 (2022), subpart B | Radiated Emissions | Class A 30 MHz-20GHz | ||
ICES-001 Issue 5 (2020) | Radiated Emissions | CSA CISPR 11:19 Group 1 - class A | ||
ICES-001 Issue 5 (2020) | Conducted Emissions | CSA CISPR 11:19 Group 1 - class A | ||
IEC61000-4-2 (2008) | Electrostatic Discharge Immunity | Contact: ±4 KV Air: ±2kV, ±4kV, ±8 KV | B | |
IEC61000-4-3 (2020) | Radiated Electromagnetic Field Immunity | 80 MHz-1000MHz: 10 V/m | A | |
IEC61000-4-4 (2012) | Electrical Fast Transient Immunity | Power: ±2 KV, 5 kHz & 100 kHz | B | |
IEC61000-4-5 (2014) A1 (2017) | Surge Immunity | Power: ±2 KV L-PE, ±1 KV L-L | B | |
IEC61000-4-6 (2013) | Immunity to Conducted Disturbances, | Power: 3V | A | |
IEC61000-4-8 (2009) | Power Frequency Magnetic Field Immunity | Continuous Field: 30A/m, 50 Hz & 60 Hz | A | |
IEC61000-4-11 (2020) | Voltage Dips, Short Interruptions and | Voltage dips: Short interruptions: | B C | |
CISPR11 (2015) A1 (2016) A2 (2019 | Conducted Emissions | Group 1 - class A 150kHz-30MHz | ||
CISPR11 (2015) A1 (2016) A2 (2019 | Radiated Emissions | Group 1 - Class A 30MHz-1GHz | ||
IEC61010-1:2010, IEC 61010-1:2010/AMD1:2016 | Protective conductor abnormal | 4.4.2.3 |