Versions Compared

Version Old Version 2 New Version Current
Changes made by

Sylvain Ménard

Sylvain Ménard

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

TheOP8219 Inverters/Decoders Interface Panel interfaces the following Festo (LabVolt) equipment in the 2 kW Doubly-Fed Induction Generator (DFIG) Research System with the OPAL-RT simulator.

  1. The Festo (LabVolt) 4 four quadrant dynamometer (2 kW) encoder module.

  2. The Festo (LabVolt) IGBT Chopper/Inverter modules (8857-1, 8837-B0).

It is designed to be installed on a standard 19″ rack and uses standard DB37 connectors to connect with the OPAL-RT simulator.
The DB9 Encoder IN connectors in the front are compatible with the encoder module in the Festo (LabVolt) 2 kW dynamometer (8505-A), and the DB9 Inverter OUT connectors in the front are compatible with the DB9 terminals on the Festo (LabVolt) IGBT/Chopper module (8857-1).
It requires to be powered by a 12 V DC power supply unit and has three different connectors options. The user needs to supply the 12 V power in only one of the power supply connectors. Since the inverter DB37 connector supplies 5 V power to the simulator Digital Out card, the user should not connect any power supply to the simulator Digital Out connector.

...

The complete system contains the following standard hardware. Cabling instructions are provided for this configuration only.

  • OPAL-RT OP4512 real-time simulator OPAL-RT OP8662 including:

    • OPAL-RT OP5360 32 channels digital output module, 5 V to 30 V

    • OPAL-RT OP5342 16 channels analog input module, 2MS/s, 16 bits, ±20 V

    • OPAL-RT OP5353 32 channels digital input module, 4.5 V to 50 V

    • OPAL-RT OP5330 16 channels analog output module, 1 MS/s, 16 bits, 35mA, ±16 V or 8 channels at 2 MS/s

  • OPAL-RTOP8219 Inverters/Decoders Interface Panel

  • OPAL-RT OP8662-8-600 High Voltage and Current Probe and OP8219 Inverters/Decoders Interface PanelFesto (LabVolt) , 15 A, 600 V

  • Festo IGBT chopper/inverter (8857)

  • Festo (LabVolt) power supply (8821)

  • Festo (LabVolt) line inductors

  • Festo (LabVolt) resistive load

  • Festo (LabVolt) three-phase wound-rotor induction motor

  • Festo (LabVolt) A-quad dynamo (8540)

  • Festo (LabVolt) DFIG machine (8505)

  • Festo (LabVolt) Motor module (8506)