Page Comparison

Warning
This Hardware Configuration has been archived and should not be used in new projects. Please contactOPAL-RT Support for more information.

Specifications

...

Image Added

This configuration requires the following FPGA boards. Please refer to the linked product page for additional information.

Quantity	FPGA Board
1	PXIe-7868R

The PXIe-7868R supports the following features:

IO Type	Details
Analog Input	6 CH, 1MS\s, 16-bit, +/- 10V Input Signal Range, Differential Tunable Gain, Offset, and Min/Max Saturation
Analog Output	18 CH, 1MS\s, 16-bit User-defined mapping to Analog Outputs available with tunable Gain, Offset, and Min/Max Saturation. Measurements Sinewaves CPU (VeriStand) Resolvers
Digital Input	32 CH, 80MHz, 3.3V TTL (Connector 1)
Digital Output	16, 10MHz, 3.3V TTL (Connector 0) User-defined mapping to Digital Outputs available with tunable Polarity. CPU (VeriStand) Encoders Hall Effect PWMs Digital Inputs

This configuration includes a pre-compiled firmware/bitfile which contains the following features:

Features	Additional Information
1x eHSx64 Solver	User-defined mapping to Circuit Sources available: CPU (VeriStand) Sinewaves IM Analog Inputs User-defined mapping to Circuit Switches available: CPU (VeriStand) PWMs SPWMs Digital Inputs
1x ACIM Constant Parameter Model	Refer to ACIM Section (Archived) for more information.
1x Resolver	The excitation signal for the resolver is directly connected to the AIO channel. This connection is not assignable. In addition, the excitation signal must be scaled appropriately such that it has an amplitude of -1V to 1V.
1x Encoder	Assignable to any DO port
1x Hall Effect Sensor	Assignable to any DO port
32x Sinewave Generators
16x PWM Generators
12x Sinusoidal PWM Generators
Analog Output Mapping and Rescaling
Analog Input Rescaling
32x Waveform Acquisition Channels