Page Content
| Table of Contents | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The following tables provide the generic general pin assignments for the OP4510 V2’s V2 DB37 and DB9 connectors. More detailed information, tailored to specific firmware,
| Info |
|---|
Detailed pin assignments for all connectors can be found in the |
...
System Description document provided with your order, or refer to the pin assignment of the OP5300 series IO module associated with each DB37F connector. |
| Note |
|---|
Before designing cables, OPAL-RT recommends using the guideline Simulator EMC cable recommendations. |
DB37 Pin Assignments
DB37
pin
Channel pin assignment
DB37
Group A and B - P1 - Channels 0 to 15 | Group A and B - P2- Channels 16 to 31 |   | ||||||
DB37F Pin | Assignment | DB37F Pin | Assignment | DB37F Pin | Assignment | DB37F Pin | Assignment | |
1 | +CH00 Note 1 | 20 | -CH00 | 1 | + | |||
CH16 | 20 | - |
CH16 | |||||
2 | +CH01 | 21 | -CH01 | 2 | + |
CH17 | 21 | -CH17 | |
3 | +CH02 | 22 | - |
CH02 | 3 | + |
CH08 | 22 | -CH18 | |
4 | +CH03 | 23 | - |
CH03 | 4 | + |
CH19 | 23 | -CH19 | |
5 | +CH04 | 24 | - |
CH04 | 5 | + |
CH20 | 24 | -CH20 | |
6 | +CH05 | 25 | - |
CH05 | 6 | + |
CH21 | 25 | -CH21 | |
7 | +CH06 | 26 | - |
CH06 | 7 | + |
CH22 | 26 | -CH22 | |
8 | +CH07 | 27 | - |
CH07 | 8 | + |
CH23 | 27 | -CH23 | |
9 | +CH08 | 28 | - |
CH08 | 9 | + |
CH24 | 28 | -CH24 | |
10 | +CH09 | 29 | - |
CH09 | 10 | + |
CH25 | 29 | - |
CH25 | |||||
11 | +CH10 | 30 | -CH10 | 11 | + |
CH26 | 30 | -CH26 | |
12 | +CH11 | 31 | - |
CH11 | 12 | + |
CH27 | 31 | -CH27 | |
13 | +CH12 | 32 | - |
CH12 | 13 | + |
CH28 | 32 | -CH28 | |
14 | +CH13 | 33 | - |
CH13 | 14 | + |
CH29 | 33 | -CH29 | |
15 | +CH14 | 34 | - |
CH14 | 15 | + |
CH30 | 34 | -CH30 | |
16 | +CH15 | 35 | - |
CH15 | 16 | + |
CH31 | 35 | - |
CH31 | |||||
17 | +12 V Note 2 | 36 | Ground | 17 | + |
12 V Note 2 | 36 |
Ground | ||||
18 | See note 1 | 37 | See note 1 | 18 |
See note 1 | 37 |
See note 1 | ||||
19 | Ground | 19 |
...
Ground |
Note 1: For exact pin assignment, see the System Description document provided with your order, or refer to the pin assignment of the OP5300 series IO module associated with each DB37F connector.
Note 2: Non-isolated, limited to 400mA.
DB9 Pin Assignments
DB9F |
|---|
Pin | RS422 OUT CH 00-02 | DB9F |
|---|
Pin | RS422 IN CH00-02 |
|---|
 | DB9F |
|---|
Pin | RS422 OUT CH 03-05 | DB9F |
|---|
Pin | RS422 IN CH03-05 | ||||||
|---|---|---|---|---|---|---|---|
1 | TX0+ | 1 | RX0+ | 1 | TX3+ | 1 | RX3+ |
2 | TX1+ | 2 | RX1+ | 2 | TX4+ | 2 | RX4+ |
3 | TX2+ | 3 | RX2+ | 3 | TX5+ | 3 | RX5+ |
4 | N.C | 4 | N.C | 4 | N.C | 4 | N.C |
5 | +12V limited* | 5 | +12V limited* | 5 | +12V limited* | 5 | +12V limited* |
6 | TX0- | 6 | RX0- | 6 | TX3- | 6 | RX3- |
7 | TX1- | 7 | RX1- | 7 | TX4- | 7 | RX4- |
8 | TX2- | 8 | RX2- | 8 | TX5- | 8 | RX5- |
9 |
DGround | 9 |
DGround | 9 |
DGround | 9 |
DGround |
*Same 12V for all the connectors. 400mA total.
CANbus Pin Assignments
DB25F |
|---|
Pin | CANbus Function | |
|---|---|---|
1 | Ground to CAN driver #1 |
 | ||
2 | Ground to CAN driver #2 | |
14 | Ground to CAN driver #3 | |
15 | Ground to CAN driver #4 | |
5, 6 | CAN-L for CAN #1 | |
18, 19 | CAN-H for CAN #1 | |
7, 8 | CAN-L for CAN #2 | |
20, 21 | CAN-H for CAN #2 | |
9, 10 | CAN-L for CAN #3 | |
22, 23 | CAN-H for CAN #3 | |
11, 12 | CAN-L for CAN #4 | |
24, 25 | CAN-H for CAN #4 | |
All other pins are not connected | ||