Description
Controlled I Source, 1-ph
The controlled current sources, 1-ph represent a single-phase A.C. source with a series or parallel RLC impedance. In the network, these sources only generate the signal received on the control connectors. Hence, this process serves only to amplify or inject a signal in the network.
| Panel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
|
Current sources have parallel impedance only that can be series of parallel RLC elements.
Current sources inject current between buses without grounding.
Mask and Parameters
| RLC connection type | Series (series R, L, C) or parallel (parallel R, L, C). | |
| R | Resistance value. | ohms |
| L | Inductance value. | H |
| C | Capacitor value/ | F |
Ports, Inputs, Outputs and Signals Available for Monitoring
Ports
- The current source injects a current from one bus (port) to another (port), without grounding.
Inputs
- I input (current source): The current amplitude signal.
Outputs
- None
Sensors
- I_label: Current signal (current source) (A).