To successfully deploy and run deploy a VeriStand project with the Power Electronics Add-On, a valid deployment license must be installed from on the development machine. A deployment license can be tied to one or more NI targets, identified by the MAC address of their primary network adapters (NIC). The Power Electronics Add-On can only be executed on the targets added to the deployment license. Follow the steps below to request and install a deployment license.
...
Your OPAL-RT Project Number
The MAC Address of the primary Ethernet adapter of your the Real Time target
A message specifying that the license will be for use with the OPAL-RT Power Electronics Add-On for NI VeriStand.
The MAC Address can be obtained by connecting to the Real Time target in the NI Measurements & Automation Explorer(NI MAX). Be sure to use the address from the eth0 (Primary) section.
...
Installing a License
Open the OPAL-RT License Manager. This program is installed alongside the Create a VeriStand project and add the Power Electronics Add-On.
In the System Definition tree, navigate to Custom Devices >> Power Electronics Add-On .
A window will pop up asking you to browse for a License File(s).
Select the License Files(s) you would like to install.
Click the OK buttonand click Add License in the ribbon menu.
Browse for the license file (.bin) in the dialog window.
Click OK.
Repeat this process on all development machines that will be used to connect to the Real Time target.
...