| Note |
|---|
| Warning |
Legacy product : we no longer sell this product. The recommended replacement product card is the OP5360. Contact your local representative for details. |
Page Content
| Table of Contents | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Description
The OP5354 features 32 output channels capable of producing signals with voltage levels between 5 and 30V.
Main Features
32 galvanically isolated output channels grouped into two banks of 16 channels each
5V to 30V output voltage
Output voltage level configuration via an external reference input pin
Output current up to ±50mA
Short-circuit protection by an auto-resettable fuse
...
| Note |
|---|
When the FPGA is not driving the signal, for example during power-up of the system, the output transistors are open and the outputs are set to the Vuser value. |
For more information about the use of Vuser and Vrtn pleaser refer to this article in the OPAL-RT knowledge base : How to power the different DB37 boards for digital outputs.
Typical Use Cases
In addition to the standard push-pull configuration, the module can operate in sink mode as shown below
...