Versions Compared

Old Version 9

changes.mady.by.user Victoria Bruny

Saved on

compared with

New Version Current

changes.mady.by.user Victoria Bruny

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

The latest instructions to redeem your license are described at the end of the Certificate. As a reference, here are the steps as of June December 2023:

  1. Log (or register) into Keysight's licensing website at:https:// www.keysight.com/find/epsoftwaresoftwaremanager to redeem your license. You will need the following information
    1. Keysight Order Number and Keysight Certificate Number from the top of the certificate
    2. Host ID* (Instructions will be provided during the redemption process in the licensing website)
  2. Once you have redeemed your license, you will receive an email with the license file and further instructions to activate your license.
  3. Typically, the .lic file will need to be installed in C:\Program Files\Scalable\exata-cps\<version>\license_dir  .

...

  1. Log (or register) into Keysight's licensing website at:https:// www.keysight.com/find/epsoftwaresoftwaremanagerto redeem your license. You will need the following information
    1. Keysight Order Number and Keysight Certificate Number from the top of the certificate
    2. Host ID* (Instructions will be provided during the redemption process in the licensing website)

  2. Once you have redeemed your license, you will receive an email with the license file and further instructions to activate your license.

    Warning

    The Host ID in this case will be the MAC Address of eno2. Do not use the MAC address of the interface used to communicate with the windows computer or you will lose the connection when starting the EXata simulation on the simulator!


  3. Upload the license on the simulator in the following directory /opt/Scalable/exata-cps/<version>/license_dir/ .
  4. This is it. No extra command required.

...

  1. Start the SSH Client and connect to the simulator using the simulator's IP address and credentials.Follow this KB for more details: How To Install and Connect with MobaXterm.

  2. Upload the exata-cps-X.X-linux-installer-64bit-rhel8 to the simulator.

  3. Run the following command to set the installer in an executable mode:

    Code Block
    chmod +x exata-cps-1X.1X-linux-installer-64bit-linux3rhel8


  4. Run the following command to start the installation process:

    Code Block
    ./exata-cps-1X.1X-linux-installer-64bit-linux3rhel8


  5. Follow the instructions displayed in the terminal. There will be several license agreement prompts.

  6. Lastly, install in the license, as explained in the previous section.

...