Content Comparison

...

This page includes the following components, configurable at edit-time only:

Ribbon Buttons

Add License.PNG Image Added Add License

Launches the OPAL-RT License Manager dialog window. Browse to a deployment license file to install it to the host machine.

Launch HCM

Launches the Hardware Configuration Manager. The Hardware Configuration Manager (HCM) is a tool used to create, edit, and remove Hardware Configurations

Right-Click Menu

Enable/Disable

Specifies if the Power Electronics Add-On real-time engine is Enabled or Disabled.

Note
Disabling the Power Electronics Add-On using the right-click menu does not impact the system definition. A user can continue to view and modify the system definition and the custom device files will still be deployed to the real-time target. However, the Power Electronics Add-On engine will not execute on the target.

...

Advanced Channels

Element Name

Type

Units

Description

Reset Models

Input

This channel resets all models in the custom device, such as eHS cores and machine model cores.

Set this channel to one of the following values:

0 - All models in the custom device will execute as configured
1 - All models in the custom device will be set into a Reset mode until the Reset Models channel is set back to 0.

Note
Models in Reset mode do not react to inputs, and their outputs should not be considered as valid. Please refer to the Reset Model Behavior section for more information.

Telemetry Channels

Section

Contains the Telemetry Channels. This section is made available when Enable Telemetry Channels is enabled.

...

Versions Compared