Page Content
| Table of Contents | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
This section describes the installation of RT-LAB target components on an OPAL-RT simulator. In other words, it includes installation information for target nodes that are running on OPAL-RTLinux (x86- based) real-time operating systems. OPAL-RT simulators already have RTLAB RT-LAB installed on them. This section only applies to users that want to install a new version of RT-LAB.
| Background Color | color | #D3D3D3
|---|
| Info |
Note: A license is needed to use a target node. For more information, read Activating a License on the Target Node. |
Installing RT-LAB on the Target Node
...
Simply accept to upgrade the target node automatically.
...
To force the installation:
Open RT-LAB.
Right-click on the target you want to install RT-LAB.
Select Install/RT-LAB from the popup menu.
...
Installing from the Network on an OPAL-RTLinux (x86-based) target node
To install from the network:
Open Windows Explorer, and go to C:\OPAL-RT\RT-LAB\vX.X.X.X\target\redhawk.
Open a second Windows Explorer window.
Enter ftp://ntuser@xxx.xxx.xxx.xxx/ in the address bar,
andntuserin the username field,and
ntuserin the password field.Note that, in this example, xxx.xxx.xxx.xxx is the target node’s IP address.
You are now connected by FTP to your compilation node.
Copy the RT-LAB archive
filefile
rtlab-redhawk-[version_name].rpmby dragging and dropping from the first window to the second.Connect to the target node by telnet (i.e. Start>Run> telnet xxx.xxx.xxx.xxx) and login as root.
Type the following command to install RT-LAB:
rpm
...
-ivh
...
--force
...
/home/ntuser/rtlab-redhawk-[version_name].rpm
Uninstalling RT-LAB
Uninstalling from the RT-LAB GUI
To uninstall from the RT-LAB GUI:
Open RT-LAB.
Double-click the target to open the Target Editor.
Open the Software Page.
Select the version to uninstall.
Click Uninstall.
Uninstalling from the Network on an OPAL-RTLinux (x86-based) target node
To manually uninstall:
Connect to the OPAL-RTLinux (x86-based) target node by telnet (i.e. Start>Run> telnet xxx.xxx.xxx.xxx) and login as root. Note that xxx.xxx.xxx.xxx is the target node’s IP address.
Type the following command:
rpm
...
-e rtlab-redhawk-[version_name]
| Background Color | ||
|---|---|---|
| ||
| Info | ||
Please note that you can list the installed RT-LAB versions by typing the following command: rpm –qa | grep rtlab | ||
| Background Color | ||
| ||
Note: You can list the installed RT-LAB versions by typing the following command : # dpkg-query --list | grep-qa | grep rtlab |