...
Clicking Enable also adds the connection points for each of the 8 channels' frequency and duty cycle in the Configuration panel of RT-LAB.
In order to output data, connections must be made between points in the model (in the form of OpOutput blocks) and the PWM output connectable points.
Connections with Dashboards panels are also possible.
To create a connection , the user drags-and-drops the connectable items onto an to the appropriate OpOutput block in the Configuration panel of the RT-LAB project, use the Dashboards interface, accessible from the project, and refer to its documentation.
Digital Type
In case the bitstream is SDIO-capable, this field takes the form of a drop-down list. This list provides the user with the choices for the type of functionality to be applied for the current group of 8 digital output channels.
...
Taking the same example as above: low voltage will be outputted for 40 us (the active part of the duty cycle of 0.4 * 100 us) and a high voltage for the remaining60 remaining 60 us of the period.
Note that this mode has an influence on the complementary signals produced when the Output complementary checkbox is selected and a Deadtime value different from 0 is used.
...