| Note |
|---|
LEGACY PRODUCTPlease note that we no longer sell the OP5368 Module. Contact your local representative or OPAL-RT for replacement products. |
The module uses only the DB37F connector corresponding to the channels 0 to 15 of the slot in which it is installed.
...
DB37 Connector
...
DB37 Channel
...
Endat pinout
...
BISS pinout
...
DB37 Connector
...
DB37 Channel
...
Endat pinout
...
BISS pinout
...
1
...
+IN00
...
CLK0+
...
DATA0+
...
20
...
The following tables provide the general pin assignments for the OP5368 DB37 connectors.
| Warning |
|---|
Legacy product : we no longer sell this product. Contact your OPAL-RT local representative for details and replacement product. |
| Info |
|---|
Detailed pin assignments for all connectors can be found in the System Description document provided with your order, or refer to the general pin assignment of your specific unit. |
| Note |
|---|
Before designing cables, OPAL-RT recommends using the guideline Simulator EMC cable recommendations. |
Group A and B - Connector P1 - Channel 00 to 07 (Connector P2 not used) |  | |||||||
DB37F Pin | Assignment | EnDat Pinout | BiSS Pinout | DB37F Pin | Assignment | EnDat Pinout | BiSS Pinout | |
1 | +D00 | CLK0+ | DATA0+ | 20 | -D00 | CLK0- | DATA0- | |
2 | +IN01D01 | DATA0+ | CLK0+ | 21 | -IN01D01 | DATA0- | CLK0- | |
3 | +IN02D02 | CLK1+ | DATA1+ | 22 | -IN02D02 | CLK1- | DATA1- | |
4 | +IN03D03 | DATA1+ | CLK1+ | 23 | -IN03D03 | DATA1- | CLK1- | |
5 | +IN04D04 | CLK2+ | DATA2+ | 24 | -IN04D04 | CLK2- | DATA2- | |
6 | +IN05D05 | DATA2+ | CLK2+ | 25 | -IN05D05 | DATA2- | CLK2- | |
7 | +IN06D06 | CLK3+ | DATA3+ | 26 | -IN06D06 | CLK3- | DATA3- | |
8 | +IN07D07 | DATA3+ | CLK3+ | 27 | -IN07D07 | DATA3- | CLK3- | |
9N | /ANot used | 28N | /ANot used | |||||
10N | /ANot used | 29N | /ANot used | |||||
11N | /ANot used | 30N | /ANot used | |||||
12N | /ANot used | 31N | /ANot used | |||||
13N | /ANot used | 32N | /ANot used | |||||
14N | /ANot used | 33N | /ANot used | |||||
15N | /ANot used | 34N | /ANot used | |||||
16N | /ANot used | 35N | /ANot used | |||||
17 | +12VRefer to unit’s pin assignment* | 36N/A | Refer to unit’s pin assignment* | |||||
18 | Reserved | 37 | N/AReserved | |||||
19 | ||||||||
...
Refer to unit’s pin assignment* |
* Unit can be a Real-time Simulator or an FPGA Processor and IO Expansion Unit from the OP4000 or the OP5000 series.