The following tables provide the general pin assignments for the OP5707XG connectors.
| Info |
|---|
Detailed pin assignments for all connectors can be found in the System Description document provided with your order, or refer to the pin assignment of the OP5300 series IO module associated with each DB37F connector. |
| Note |
|---|
Before designing cables, OPAL-RT recommends using |
...
the guideline Simulator EMC cable recommendations. |
...
As explained in OP5707XG IO Configuration, the OP5300 mezzanine modules are grouped in 4 pairs, and the two mezzanines of each pair are labelled A and B.
The pinout of the two P1 and P2 connectors of each mezzanine is as follows:
...
DB37
...
Module pin assignment
...
RJ45
...
DB37
...
Module pin assignment
...
DB37
...
Module pin assignment
...
RJ45
...
DB37
...
Module pin assignment
...
1
...
+CH00
...
DB37 Pin Assignments
Group A and B - P1 - Channels 0 to 15 | Group A and B - P2 - Channels 16 to 31 |   | ||||||
DB37F Pin | Assignment | DB37F Pin | Assignment | DB37F Pin | Assignment | DB37F Pin | Assignment | |
1 | +CH00 Note 1 | 20 | -CH00 | 1 | +CH16 | |||
16-19
20 | -CH16 |
2 | +CH01 | 21 | -CH01 | 2 | +CH17 | 21 | -CH17 |
3 | +CH02 | 22 | -CH02 | 3 | + |
CH08 | 22 | -CH18 | |||||
4 | +CH03 | 23 | -CH03 | 4 | +CH19 | 23 | -CH19 |
5 | +CH04 |
4-7
24 | -CH04 | 5 | +CH20 |
20-23
24 | -CH20 | ||||||
6 | +CH05 | 25 | -CH05 | 6 | +CH21 | 25 | -CH21 |
7 | +CH06 | 26 | -CH06 | 7 | +CH22 | 26 | -CH22 |
8 | +CH07 | 27 | -CH07 | 8 | +CH23 | 27 | -CH23 |
9 | +CH08 |
8-11
28 | -CH08 | 9 | +CH24 |
24-27
28 | -CH24 | ||||||
10 | +CH09 | 29 | -CH09 | 10 | +CH25 | 29 | -CH25 |
11 | +CH10 | 30 | -CH10 | 11 | +CH26 | 30 | -CH26 |
12 | +CH11 | 31 | -CH11 | 12 | +CH27 | 31 | -CH27 |
13 | +CH12 |
12-15
32 | -CH12 | 13 | +CH28 |
28-31
32 | -CH28 | ||||||
14 | +CH13 | 33 | -CH13 | 14 | +CH29 | 33 | -CH29 |
15 | +CH14 | 34 | -CH14 | 15 | +CH30 | 34 | -CH30 |
16 | +CH15 | 35 | -CH15 | 16 | +CH31 | 35 | -CH31 |
17 |
Not used | 36 | Not used | 17 |
Not used | 36 | Not used |
18 |
See note 1 |
37 |
See note 1 |
18 |
See note 1 | 37 |
See note 1 | ||||
19 | Not used | 19 |
* Non-isolated, limited to 400mA
...
Not used |
Note 1: See the System Description document provided with your order, or refer to the pin assignment of the OP5300 series IO module associated with each DB37F connector for detailed pin assignment.