...
Page Content
| Table of Contents | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The OP5330 module provides 16 single-ended analog output channels sampled at 1MS/s or 8 single-ended analog output channels sampled at 2MS/s, and produces values up to ±16V.
The maximum sampling rate is configurable through RT-LAB. See OP5330 16 AOUT- Dynamic sampling rate
It comes in two versions: the OP5330-1 and the OP5330-3.
The only difference between these two versions is the current limit specification.
...
| Note |
|---|
NOTE: A version of this board, the OP5330-1K2, intended for traveling wave applications, has had a modification made on the output voltage to ±4V for a lower signal/noise ratio. |
...
Vendor Part # | Description |
|---|---|
OP5330-1K1 | Analog output card 16 channels, 1 MS/s, 16 bits, 35mA, ±16 V |
OP5330-1K2 | Analog output card 16 channels, 1 MS/s, 16 bits, 35mA, ±4 V |
OP5330-3K1 | Analog output card 16 channels, 1 MS/s, 16 bits, 15mA, ±16 V |
Typical Use Cases
The following diagram provides an example of a typical application using the OP5330. Analog output of either 15 or 35 (maximum) mA is directed to the ECU under test, where the analog input is processed by signal conditioning.
...