Page Content
...
| Note |
|---|
Before designing cables, OPAL-RT recommends using the guideline Simulator EMC cable recommendations. |
DB37 Pin Assignments
Group A and B - P1 - Channels 0 to 15 | Group A and B - P2- Channels 16 to 31 |   | ||||||
DB37F Pin | Assignment | DB37F Pin | Assignment | DB37F Pin | Assignment | DB37F Pin | Assignment | |
1 | +CH00 Note 1 | 20 | -CH00 | 1 | +CH16 | 20 | -CH16 | |
2 | +CH01 | 21 | -CH01 | 2 | +CH17 | 21 | -CH17 | |
3 | +CH02 | 22 | -CH02 | 3 | +CH08 | 22 | -CH18 | |
4 | +CH03 | 23 | -CH03 | 4 | +CH19 | 23 | -CH19 | |
5 | +CH04 | 24 | -CH04 | 5 | +CH20 | 24 | -CH20 | |
6 | +CH05 | 25 | -CH05 | 6 | +CH21 | 25 | -CH21 | |
7 | +CH06 | 26 | -CH06 | 7 | +CH22 | 26 | -CH22 | |
8 | +CH07 | 27 | -CH07 | 8 | +CH23 | 27 | -CH23 | |
9 | +CH08 | 28 | -CH08 | 9 | +CH24 | 28 | -CH24 | |
10 | +CH09 | 29 | -CH09 | 10 | +CH25 | 29 | -CH25 | |
11 | +CH10 | 30 | -CH10 | 11 | +CH26 | 30 | -CH26 | |
12 | +CH11 | 31 | -CH11 | 12 | +CH27 | 31 | -CH27 | |
13 | +CH12 | 32 | -CH12 | 13 | +CH28 | 32 | -CH28 | |
14 | +CH13 | 33 | -CH13 | 14 | +CH29 | 33 | -CH29 | |
15 | +CH14 | 34 | -CH14 | 15 | +CH30 | 34 | -CH30 | |
16 | +CH15 | 35 | -CH15 | 16 | +CH31 | 35 | -CH31 | |
17 | +12 V Note 2 | 36 | Ground | 17 | +12 V Note 2 | 36 | Ground | |
18 | See note 1 | 37 | See note 1 | 18 | See note 1 | 37 | See note 1 | |
19 | Ground | 19 | Ground | |||||
Note 1: For exact pin assignment, see the System Description document provided with your order, or refer to the pin assignment of the OP5300 series IO module associated with each DB37F connector.
Note 2: Non-isolated, limited to 400mA.
...
Refer to the OP5969-1 user manual for the DB9 connector pin assignment.
CANbus Pin Assignments
DB25F Pin | CANbus Function |
|
|---|---|---|
1 | Ground to CAN driver #1 | |
2 | Ground to CAN driver #2 | |
14 | Ground to CAN driver #3 | |
15 | Ground to CAN driver #4 | |
5, 6 | CAN-L for CAN #1 | |
18, 19 | CAN-H for CAN #1 | |
7, 8 | CAN-L for CAN #2 | |
20, 21 | CAN-H for CAN #2 | |
9, 10 | CAN-L for CAN #3 | |
22, 23 | CAN-H for CAN #3 | |
11, 12 | CAN-L for CAN #4 | |
24, 25 | CAN-H for CAN #4 | |
All other pins are not connected. | ||
