The Pos-seq, variable frequency component computes the positive-sequence (magnitude and phase) of the input signal **abc** over a running window of one cycle of the fundamental frequency given by input **f**. The reference frame required for the computation is given by input **wt**.

The output is held constant to the specified **Initial magnitude** and **Initial phase** values for one cycle of the specified initial frequency.

# Symbol

## Mask Parameters

Name | Description | Unit | Variable = {Possible Values} | |
---|---|---|---|---|

Description | Use this field to add all kinds of information about the component | Description = {'string'} | ||

Initial frequency | Initial frequency for the first simulation cycle. This value cannot be modified during the simulation | Hz | Finit = { [0, 1e12] } | |

Minimum frequency | Minimum expected frequency of the input signal. This value cannot be modified during the simulation | Hz | Fmin = { [0, 1e12] } | |

Initial magnitude | Initial value of the magnitude of the output signal for the first simulation cycle. This value cannot be modified during the simulation | MagInit = { [0, 1e12] } | ||

Initial phase | Initial value of the phase of the output signal for the first simulation cycle. This value cannot be modified during the simulation | deg. | PhaseInit = { [0, 360] } |

...