...
To start with the Impedance Measurement feature, Select the bus on which you want to measure the impedance, define the frequency range and increment, then click the Play button to generate the data and the graphsgraph.
...
Variable | Description | Unit |
|---|---|---|
Bus | Name of the Bus in the system | NA |
Frequency min | Minimum Frequency | Hz |
Frequency max | Maximum Frequency | Hz |
Increment | Frequency scan resolution increment | Hz |
Button
Play button: Run impedance measurement.
Plot button: Display and open the graphic in the Graph and HTML tab once the impedance measurement has been run.
Highlight button: Highlight the selected Bus in the circuit.
...
Data
Results
CSV data
The Data tab displays the measured values (impedance magnitude and impedance angle) according to the parameters. (1) Data Results can be saved in .csv format.
...
Once your data are available, you can observe the graph either in the HTML or the graph tab
Graph
The graph tab displays impedance magnitude and angle.
Note: This tab is mostly used if you are working offline and therefore do not have access to the HTML tab with all the options
...
HTML
The HTML tab displays impedance magnitude and angle in HTML format.
Note: this tab is available only if you have an internet connection.
From this tab you can:
...
Save the graph in .html (1) and display your graph in your browser
...
Online graph
If you have an internet connection, HYPERSIM will use a Google plugin to display the data in HTML graphs.
Graphs can be regrouped into 1 graph using the “single graph” option
Zoom in by scrolling back with the mouse and go back from the original zoom with a right click.
...
.
The graph can be exported to an HTML file
...
Offline Graph
In case online services are unavailable, HYPERSIM will display the results using local graphics features.
...