Table of Contents
...
Bitstream files generated with an RT-XSG version of 3.1.2 or later offer the possibility of using the Advanced Analog Out feature.
The user will know if the bitstream is equipped with Advanced Analog Out as soon as the bitstream configuration file is loaded in the main section of the current board's configuration page.
If the bitstream only supports standard analog output then no processing options can be seen in the signals list (it will only be a list with channel names), whereas if the Advanced Analog Out is supported, then the above mentioned options will be visible and configurable.
Slot configuration
Apart from the default fields of a slot configuration (described in the overview help document of the OPAL-RT Board driver), the following field can also be configured:
...
| Name | The name of the channel group denotes the physical channels of the analog output module the current configuration will be applied to. |
| Enable | Checking this box will enable the transmission of analog data for the channels in the group once the simulation has started. Clicking on Enable also makes the group of 8 channels available as connections in HYPERSIM . |
Signals configuration
Channels in analog output groups that were identified as standard do not have any parameters to configure.
...