| Table of Contents |
|---|
...
Once the bitstream configuration file has been parsed, the location of the analog input modules becomes visible to the user. The channels of the modules are grouped into bunches of 8. By clicking on each group of 8, the user has access to the configurable options of the group.
Channel group configuration
| Name | The name of the channel group denotes the physical channels of the analog input module the current configuration will be applied to. |
| Enable | Checking this box will enable the acquisition of analog data for the channels in the group once the simulation has started. Clicking Enable also makes the group of 8 channels available as connections in HYPERSIM. This means that if the user wishes to display the analog data received in the model, connections must be made between points in the model and the analog input connectable points. |
...
Channels in analog input groups do not have any parameters to configure.
Characteristics and limitations
For the connector pin assignments, the user should refer to the carrier documentation.
The current version of the analog input functionality of the OPAL-RT Board driver has the following limitations:
...