The Applicom S7 I/O interface uses the legacy file system for configuration. It needs two configuration files to be able to work properly in HYPERSIM : the APPLICOM.IO and APPLICOM_CFG.OPAL files.
...
The user must use Snap7 server to connect with the Applicom card client running on the simulator. The IP address that has to be used in Snap7 server to connect with the Applicom card is the IP address defined in the .ply file for the PLC.
The user must use their own .ply file to exchange data with the Applicom card.
.ply file currently present in the example model is configured with the following IP addresses:
...