Quick Nav
Page Content
Table of Contents | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Have a question or need help?
Auibutton | |||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
custom-icon | icon | custom||||||||||||||||||||||||||||||
|
Solution
Cfm tabs page | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||
The PROFINET IO-Device driver allows the simulator to communicate with one or multiple pieces of equipment configured with a PROFINET IO - Controller interface. The PROFINET IO-Device interface can operate over TCP/IP using an Ethernet physical link connected to a network and be detected via DCP (Discovery and Configuration Protocol). |
Cfm tabs page | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
PROFINET (Process Field Network) is an industry technical standard for data communication over Industrial Ethernet, designed for collecting data from, and controlling equipment in industrial systems, with a particular strength in delivering data under tight time constraints. The standard is maintained and supported by Profibus PROFIBUS and Profinet PROFINET International, an umbrella organization headquartered in Karlsruhe, Germany (source: Wikipedia). |
Software Platform Compatibility
PROFINET IO-Device Documentation
|
|
|
|
|
|
|
|
|
Supported features
The following is a list of the features supported by the driver:
DCP
GSDML parser for configuration
Multiple cards support
Channel diagnosis
IO status (IOCS/IOPS)
Communication watchdog
Shared device access
MRP (Media Redundancy Protocol)
Limitations
The following is a list of the limitations of the driver:
No alarm handling
No fast start-up
No multicast device-to-device communication
No support for iPar (parameter server)
No support for time synchronization
No support for ProfiDrive or ProfiSafe profiles
|
Product Selection Guide
Type | Description | Product Number |
---|
Simulator Compatibility |
---|
Additional requirement(s)
OP4510-series
OP5600-series
OP5700-series
OP4610XG
Software
OP3145
Driver - PROFINET-IO Device license
(one license per CIFX 50E-RE PCIe board)
OP4510v2 | OP5033XG | OP5600v2 | OP5700 |
---|---|---|---|
Driver | Driver license for PROFINET IO protocol.One license per CIFX 50E-RE PCIe board is required. A Hilscher CIFX 50E-RE PCIe board (Product |
Number OP3113, see below) is required for each slave driver. | OP3145 |
YES | YES |
YES |
YES |
Requires OP3113-OP4510, OP3113-OP5030 or, OP3113-OP56xx-OP57xx installed on Real-Time Simulator.
External hardwareAdd-on module | EtherCAT CIFX 50E-RE PCIe Communication Interface*. | OP3113-OP4510 | OP4510v2 | |||
---|---|---|---|---|---|---|
OP3113-OP5030 | YES | |||||
OP3113-OP56xx-OP57xx |
CIFX 50E-RE Communication Interface PCIe for OP45xx, OP56xx or OP57xx series simulators
YES | YES |
* Available PCIe slot required. Note that OP4510 and OP4512 simulators only have one PCIe slot.