This page explains how to install and configure all the software required to execute a courseware.
...
To run OPAL-RT’s courseware, you must start by installing the following four OPAL-RT packages:
RT-LAB v2024.3.02.2148
ARTEMIS v7.10.01.1621
RT-EVENTS v4.7.8.1314
TestDrive v2.9.0.16
1.1 Installation of RT-LAB
| Anchor | ||||
|---|---|---|---|---|
|
...
Launch RT-LAB and go to the workbench.
Click on Targets, you must see the localhost as shown below:
| Anchor | ||||
|---|---|---|---|---|
|
...
Double-click on localhost. You will obtain the following on the right side:
...
Launch the MetaController v2024.3.02.2148
You are supposed to obtain the corresponding icon in the taskbar at the bottom of the screen as shown here below the yellow arrow:
...
While every effort has been made to ensure accuracy in this publication, no responsibility can be accepted for errors or omissions.
Data may change, as well as legislation, and you are strongly advised to obtain copies of the most recently issued regulations, standards, and guidelines.
This publication is not intended to form the basis of a contract.