Page Content
...
The 32 digital I/O (DIO) on the OP48H10 module can be configured as inputs our outputs by groups of 8 (4 banks of 8 IOs). DIOs uses connectors P1 and P2 and are numbered from DIO00 to DIO31.
...
Connector P1 - Channels 00 to 15 |
| Connector P2 - Channels 16 to 31 | ||||||
|---|---|---|---|---|---|---|---|---|
DB37F Pin | Assignment | DB37F Pin | Assignment | DB37F Pin | Assignment | DB37F Pin | Assignment | |
1 | +DIO00 | 20 | GND | 1 | +DIO16 | 20 | GND | |
2 | +DIO01 | 21 | GND | 2 | +DIO17 | 21 | GND | |
3 | +DIO02 | 22 | GND | 3 | +DIO18 | 22 | GND | |
4 | +DIO03 | 23 | GND | 4 | +DIO19 | 23 | GND | |
5 | +DIO04 | 24 | GND | 5 | +DIO20 | 24 | GND | |
6 | +DIO05 | 25 | GND | 6 | +DIO21 | 25 | GND | |
7 | +DIO06 | 26 | GND | 7 | +DIO22 | 26 | GND | |
8 | +DIO07 | 27 | GND | 8 | +DIO23 | 27 | GND | |
9 | +DIO08 | 28 | GND | 9 | +DIO24 | 28 | GND | |
10 | +DIO09 | 29 | GND | 10 | +DIO25 | 29 | GND | |
11 | +DIO10 | 30 | GND | 11 | +DIO26 | 30 | GND | |
12 | +DIO11 | 31 | GND | 12 | +DIO27 | 31 | GND | |
13 | +DIO12 | 32 | GND | 13 | +DIO28 | 32 | GND | |
14 | +DIO13 | 33 | GND | 14 | +DIO29 | 33 | GND | |
15 | +DIO14 | 34 | GND | 15 | +DIO30 | 34 | GND | |
16 | +DIO15 | 35 | GND | 16 | +DIO31 | 35 | GND | |
17 | Reserved | 36 | GND | 17 | Reserved | 36 | GND | |
18 | Reserved | 37 | Reserved | 18 | Reserved | 37 | Reserved | |
19 | GND | 19 | GND | |||||
Analog Outputs
The 16 analog outputs (AOUT) on the OP48H10 module uses connector P3 and are numbered AOUT00 to AOUT15.
...
Connector P3 - Channel 00 to 15 |
| |||
|---|---|---|---|---|
D37F Pin | Assignment Pin | DB37F Pin | Assignment Pin | |
1 | +AOUT00 | 20 | GND | |
2 | +AOUT01 | 21 | GND | |
3 | +AOUT02 | 22 | GND | |
4 | +AOUT03 | 23 | GND | |
5 | +AOUT04 | 24 | GND | |
6 | +AOUT05 | 25 | GND | |
7 | +AOUT06 | 26 | GND | |
8 | +AOUT07 | 27 | GND | |
9 | +AOUT08 | 28 | GND | |
10 | +AOUT09 | 29 | GND | |
11 | +AOUT10 | 30 | GND | |
12 | +AOUT11 | 31 | GND | |
13 | +AOUT12 | 32 | GND | |
14 | +AOUT13 | 33 | GND | |
15 | +AOUT14 | 34 | GND | |
16 | +AOUT15 | 35 | GND | |
17 | Reserved | 36 | GND | |
18 | Reserved | 37 | Reserved | |
19 | GND | |||
Analog Inputs
The 16 analog inputs (AIN) on the OP48H10 module uses connector P4 and are numbered AIN00 to AIN15.
...
Connector P4 - Channels 00 to 15 |
| |||
|---|---|---|---|---|
DB37F Pin | Assignment Pin | DB37F Pin | Assignment Pin | |
1 | +AIN00 | 20 | -AIN00 | |
2 | +AIN01 | 21 | -AIN01 | |
3 | +AIN02 | 22 | -AIN02 | |
4 | +AIN03 | 23 | -AIN03 | |
5 | +AIN04 | 24 | -AIN04 | |
6 | +AIN05 | 25 | -AIN05 | |
7 | +AIN06 | 26 | -AIN06 | |
8 | +AIN07 | 27 | -AIN07 | |
9 | +AIN08 | 28 | -AIN08 | |
10 | +AIN09 | 29 | -AIN09 | |
11 | +AIN10 | 30 | -AIN10 | |
12 | +AIN11 | 31 | -AIN11 | |
13 | +AIN12 | 32 | -AIN12 | |
14 | +AIN13 | 33 | -AIN13 | |
15 | +AIN14 | 34 | -AIN14 | |
16 | +AIN15 | 35 | -AIN15 | |
17 | Reserved | 36 | GND | |
18 | Reserved | 37 | Reserved | |
19 | GND | |||
