Page Comparison

...

1. Save a backup of the orignal project by making a copy of the entire project folder on disk.

2. Follow the steps in the Uninstallation and Upgrade Procedure to upgrade the Power Electronics Add-On to the desired version. If multiple versions are to be skipped during the upgrade, it is not necessary to install intermediate versions.

3. Follow the procedures below, beginning with the section corresponding to the Add-On version used to create the original project.

4. Complete the steps in each subsequent section until the desired Power Electronics Add-On version is reached. Steps repeated across multiple sections can be skipped.
   

Anchor
1.15.Xto1.16.0 1.15.Xto1.16.0

Migrating from 1.15.X to 1.16.0

Project Dependency Update

1. Open the System Definition of the existing project. This will automatically trigger a dependency update. 

2. If a window opens asking for files to be relinked, click Skip. The files will automatically be relinked by the system definition update process.

3. Save and close the System Definition.

Anchor
1.14.xto1.15 1.14.xto1.15

Migrating from 1.14.X to 1.15.0

Project Dependency Update

1. Open the System Definition of the existing project. This will automatically trigger a dependency update. 

2. If a window opens asking for files to be relinked, click Skip. The files will automatically be relinked by the system definition update process.

3. Save and close the System Definition.

...

Anchor
1.14.0to1.14.1 1.14.0to1.14.1

Migrating from 1.14.0 to 1.14.1

Project Dependency Update

1. Open the System Definition of the existing project. This will automatically trigger a dependency update. 

2. If a window opens asking for files to be relinked, click Skip. The files will automatically be relinked by the system definition update process.

3. Save and close the System Definition.

Anchor
1.13.xto1.14 1.13.xto1.14

Migrating from 1.13.X to 1.14.1

Project Dependency Update

1. Open the System Definition of the existing project. This will automatically trigger a dependency update. 

2. If a window opens asking for files to be relinked, click Skip. The files will automatically be relinked by the system definition update process.

3. Save and close the System Definition.

...

Anchor
1.13.0to1.13.1 1.13.0to1.13.1

Migrating from 1.13.0 to 1.13.1

Project Dependency Update

1. Open the System Definition of the existing project. This will automatically trigger a dependency update. 

2. If a window opens asking for files to be relinked, click Skip. The files will automatically be relinked by the system definition update process.

3. Save and close the System Definition.

Anchor
1.12.xto1.13 1.12.xto1.13

Migrating from 1.12.X to 1.13.1

Project Dependency Update

1. Open the System Definition of the existing project. This will automatically trigger a dependency update. 

2. If a window opens asking for files to be relinked, click Skip. The files will automatically be relinked by the system definition update process.

3. Ensure that all the elements in the Sources and Switches pages have valid mapping elements selected. If they do not all have valid mapping selections, an error will be thrown at deployment. 

4. Expand any machines in the project and navigate to each of their Resolver and Encoder pages. If the Number of Pole Pairs parameter is set to 0, update it to 1 or another nonzero value. Any machine sensor configured to have 0 pole pairs will cause an error to be thrown at deployment.

5. Save and close the System Definition.

...

Anchor
1.11.xto1.12 1.11.xto1.12

Migrating from 1.11.X to 1.12.0

Project Dependency Update

1. Open the System Definition of the existing project. This will automatically trigger a dependency update. 

2. If a window opens asking for files to be relinked, click Skip. The files will automatically be relinked by the system definition update process.

3. Ensure that all the elements in the Sources and Switches pages have valid mapping elements selected. If they do not all have valid mapping selections, an error will be thrown at deployment. 

4. In the Waveforms and Analog Outputs pages, identify any elements set to <Machine Name>.Mechanical Angle (Deg). Use the drop-down arrow for an element to update its value to <Machine Name>.Mechanical Angle (Turn).

5. Save and close the System Definition.

...

Anchor
1.10.xto1.11 1.10.xto1.11

Migrating from 1.10.X to 1.11.0

Project Dependency Update

1. Open the System Definition of the existing project. This will automatically trigger a dependency update.

2. Save and close the System Definition.

...

Anchor
1.9.xto1.10 1.9.xto1.10

Migrating from 1.9.X to 1.10.0

Project Dependency Update

1. Open the System Definition of the existing project. This will automatically trigger a dependency update.

2. Save and close the System Definition.

...

Anchor
1.8.xto1.9 1.8.xto1.9

Migrating from 1.8.X to 1.9.0

Project Dependency Update

When a VeriStand project created in a previous version of the Add-on is opened for the first time, a prompt is shown to the user stating that that the following files are missing on disk:

...

Anchor
1.7.xto1.8 1.7.xto1.8

Migrating from 1.7.X to 1.8.0

Project Dependency Update

When a VeriStand project created in a previous version of the Add-on is opened for the first time, a prompt is shown to the user stating that that the following files are missing on disk.

...