Page Content
...
All variants of the OP5143-4 card can in installed in these hardware platforms:
OP5033XG Real-Time SimulatorOP5705XG Versatile FPGA based Real-Time Digital Simulator
...
Model Identification | OP5143-4 | OP5143-4-K1 | OP5143-4-K2 | OP5143-4-K3 |
|---|---|---|---|---|
MuSE Licenses | 1x optional central node license | N/A | ||
Aurora Protocol Licenses | Optional license | 3x licenses included | ||
Fiber-Optic Transceivers SFP 850 nm 5Gbps | 2x recommended optional transceivers | 3x transceivers included | ||
Fiber-Optic Cable multimode Duplex Fiber Cable, 62.5/125, LC-LC for SFP (Muse) | 1x recommended optional fiber-optic cable. | 3x recommended optional fiber-optic cables | ||
...
Operating temperature | 10 to 40° C |
|---|---|
Storage temperature | -55 to 85 °C |
Relative humidity | 10 to 90%, non-condensing |
Maximum altitude | 2,000 m |
I/O Ports
...
Power indicator.
4 SFP ports and status LEDs for each channel (LED 0 = channel 0):
Blinking green: an SFP module is plugged into the port and the bitstream is using Aurora for this channel
Continuous green: an SFP module is plugged into the port and the bitstream is not using Aurora for this channel
Blinking red: rx_loss is 1
Continuous red: tx_fault is 1 (these are SFP status signals)
OFF: no module plugged into the port and no Aurora present in the bitstream for this channel