Note: When dynamic simulation is set to Start from Power-flow in Simulation settings tab of the Solver, the voltage magnitudes and angles of the internal ideal voltage source are recalculated to match with the power-flow results of the connected buses. For power-flow, the connected buses should be defined as SLACK type. In this case, the voltage magnitude and angle of the buses are taken from the Bus page.
Documentation Home Page ◇ ePHASORSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
Manage space
Manage content
Integrations
App links