Sinewave Generators
Next, we can configure the Sinewave Generators used in the simulation. In the Configuration Tree, expand Circuit Model >> Sinewave Generators Configure the Sinewave Generators by confirming that the Default Value of each relevant channel is configured as shown in the table below. Click Save.
| Frequency Engines | ||
| Channel Name | Default Value | |
|---|---|---|
Frequency Engine 0 | 60Hz | |
| SWG 0 | ||
| Channel Name | Default Value | |
| Frequency Engine | 0 | |
| Phase | 0º | |
| SWG 1 | ||
| Channel Name | Default Value | |
| Frequency Engine | 0 | |
| Phase | -120º | |
| SWG 2 | ||
| Channel Name | Default Value | |
| Frequency Engine | 0 | |
| Phase | 120º | |
The default value of the Phase channel of SWG 1 is set to -120. The default values for the other channels listed above can be configured in a similar manner.
SPWM Generators
Error rendering macro 'excerpt-include' : No link could be created for '2.6 Setting Default Values for the SPWM Generators'.
| SPWM Carrier | ||
| Channel Name | Default Value | |
|---|---|---|
Carrier Frequency | 5000Hz | |
| SPWM Generator 0 | ||
| Channel Name | Default Value | |
| Frequency Engine | 0 | |
| Phase | 0º | |
| SPWM Generator 1 | ||
| Channel Name | Default Value | |
| Frequency Engine | 0 | |
| Phase | -120º | |
| SPWM Generator 2 | ||
| Channel Name | Default Value | |
| Frequency Engine | 0 | |
| Phase | 120º | |
| SPWM Generator 3 | ||
| Channel Name | Default Value | |
| Frequency Engine | 0 | |
| Phase | 30º | |
| SPWM Generator 4 | ||
| Channel Name | Default Value | |
| Frequency Engine | 0 | |
| Phase | -90º | |
| SPWM Generator 5 | ||
| Channel Name | Default Value | |
| Frequency Engine | 0 | |
| Phase | 150º | |
The default value of the Phase channel of SPWM Generator 1 is set to -120. The default values for the other channels listed above can be configured in a similar manner.