Block
Mask
Description
This block recovers the data from RT-LAB through the DataIN block and generates the signals needed by an analog output interface block.
Parameters
This block has no parameters.
Inputs
| DataIn | This signal must be connected to one of the DataINi output ports of the DataIn block. |
|---|---|
| DataINSOF | This signal must be connected to one of the SofINi output ports of the DataIn block. |
Outputs
| Ch01_Ch00 | These ports represent the voltage to be outputted by a digital-to-analog conversion module. They are in the UFix33_0 format. The 16 LSBs correspond to the first channel, the next 16 bits to the second channel, and the MSB is the “Valid” bit (this bit is unused for analog output interfaces). |
|---|---|
| Ch03_Ch02 | |
| Ch05_Ch04 | |
| Ch07_Ch06 |
Characteristics and Limitations
This Block has no specific characteristics or limitations.