Documentation Home Page ◇ Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Introduction

The extended ID is only available for these models:

  • OP5607
  • OP5700
  • OP5707 / OP5707XG

The chassis ID may be composed in two parts and can be modified using BOTH DIP switches SW1 and SW6A.

DIP switches locations

Modify chassis ID with DIP switches SW1 and SW6A

DIP switch SW1:

  • Allows users to select LSB ID values (0-31)

DIP switch SW6A:

  • It allows users to select whether additional ID bits will be used in the chassis ID
  • Switch IND3 determines whether DIP switch SW6A is enabled [ON] or disabled [OFF].
  • If switch IND3 is ON, switches IND0, IND1 and IND2 will be used to complete the MSB chassis ID.


Example

This image provides an example of how to configure the chassis ID.


  • No labels

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter