Documentation Home Page ◇ Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

The OP8E51 module is designed to be connected to digital output signals coming from an OPAL-RT simulator in order to control 4 dry-contact relays.

Features

  • 4 channels
  • Relay output  (normally open or normally closed.) individually selectable via jumpers
  • Input command from 5V to 30V to energize the relay.

Board Layout

OP8E51 - Top View

Channel Description

Each channel holds a dry-contact relay that get activated by an output signal coming from the simulator. The voltage range of this signal is 5-30V.

The default relay setting is Normally Closed (N.C.). Jumpers on the board allow changing the relay setting to Normnall Open (N.O.)

Relay Position Jumper Settings

Typical Application Diagram


OP8E51 Typical Application Diagram

Pin Assignment

Refer to the OP8E00 Modules Pin Assignment table.

  • No labels

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter